Agilent Technologies 16760A manual Default storing is initially on or off, Triggering on

Chapter 3: Using the Logic Analyzer in Timing or State Mode

Setting Up Triggers and Running Measurements

“To select the conventional/transitional configuration” on page 44

	To specify whether default storing is initially on or off
	In the state sampling mode, or in the timing sampling mode's 400 MHz
	/ 32M Sample Transitional or Store Qualified configuration when
	Transitions are not stored by default, you can specify whether the
	default storing is initially on or off.
	1. In the Trigger tab's Default Storing subtab, select the At start of
	acquisition option button and choose either On or Off.
See Also	“Storage Qualification” on page 249 in “Understanding Logic Analyzer
	Triggering” on page 240
	“To insert a store action (state mode)” on page 85
	“To specify default storing” on page 76

Editing the Trigger Sequence (Timing or 200, 400 Mb/s State Only)

When you want to trigger on several events in the device under test that follow one another, you need to use multiple levels in the trigger sequence.

For example, multiple levels in the trigger sequence let you trigger on a particular function calling sequence or capture only the execution within a particular program loop.

•“To insert/replace/delete sequence levels” on page 79

•“To cut/copy-and-paste sequence levels” on page 80

•“To specify a level's goto or trigger action (timing or 200 Mb/s state only)” on page 80

•“To send e-mail when the trigger occurs (timing or 200 Mb/s state only)” on page 81

•“To view a picture of the trigger sequence” on page 83

78