Agilent Technologies 16760A manual To adjust symbol values for relocated code

Chapter 3: Using the Logic Analyzer in Timing or State Mode

Using Symbols

the object file symbols are reloaded.

To delete object file symbol files

1.Select the Symbol tab, and then the Object File tab.

2.Select the file name you want to delete in the text box labeled, Object Files with Symbols Loaded For Label.

3.Select Unload.

See Also “Symbol File Formats” on page 197

To adjust symbol values for relocated code

Use this option to add offset values to the symbols in an object file. You will need this if some of the sections or segments of your code are relocated in memory at run-time. This can occur if your system dynamically loads parts of your code so that the memory addresses that the code is loaded into are not fixed.

To adjust symbol values for a single section of code

1.Select the Symbol tab and then the Object File tab.

2.In the Object Files with Symbols Loaded For Label list, select the file whose symbols you wish to relocate.

3.Select the Relocate Sections... button.

4.In the Section Relocation dialog, select the field you wish to edit in the section list.

5.Enter the new value for that field and press Enter on your keyboard.

6.Repeat steps 4 through 6 above for any other sections to be relocated.

7.Select Close.

To adjust all symbol values

1.Select the Symbol tab and then the Object File tab.

2.In the Object Files with Symbols Loaded For Label list, select the file

103