Chapter 3: Using the Logic Analyzer in Timing or State Mode

Setting Up Triggers and Running Measurements

description, and select the levels from the current trigger sequence that be the trigger function; then, select OK.

Once you have created a trigger function library with trigger functions, you can:

 

• Load or unload the trigger function library.

 

• Insert and break down trigger functions from the loaded library just like

 

normal trigger functions.

 

• Copy trigger function libraries to other logic analysis systems and load

 

them into other logic analyzers that have trigger function library capability.

 

• Edit the trigger function library, adding or deleting functions, or delete the

 

library.

 

 

NOTE:

If a trigger sequence or configuration file uses a trigger function library that

 

has been deleted, or a trigger function that has been deleted from a library,

 

the logic analyzer replaces the missing function with the default trigger

 

function.

 

 

To load/unload trigger function libraries

1.In the Trigger tab's Trigger Functions subtab, select the Trigger function libraries button.

2.Select the library from the list.

Only libraries created in the same sampling mode are available.

3.Select the Load (or Unload) button.

All of the library's trigger functions are added to (or removed from) the list of trigger functions.

To copy trigger function libraries between systems

1.Connect your logic analysis system to the network. (see the Agilent Technologies 16700A/B-Series Logic Analysis System help volume)

2.Using a computer on your network, copy the appropriate files from the / logic/trigger_functions/ directory to a central location, or directly to other logic analyzers on the network.

See Also

“To break down a trigger function (timing or 200 Mb/s state only)” on

74

Page 74
Image 74
Agilent Technologies 16760A To load/unload trigger function libraries, To copy trigger function libraries between systems