Agilent Technologies 16760A To assign pods to the logic analyzer, To specify threshold voltages

Chapter 1: Getting Started

Probing and Sampling Mode Selection Steps

To assign pods to the logic analyzer

1.In the Format tab, select the Pod Assignment button.

2.In the Pod Assignment dialog, drag a pod to the appropriate logic analyzer.

3.Select the Close button.

To specify threshold voltages

The threshold voltage is the voltage level that a signal must cross before the logic analyzer recognizes a change in logic levels.

1.In the Format tab, select the button under the pod name.

2.In the Pod threshold dialog, select a Standard, External Ref, Differential, or a User Defined threshold voltage.

3.Select the Close button.

4.Select the Clk Thresh button.

5.In the Clock Thresholds dialog, select the button of the clock whose threshold you wish to set.

6.In the J, K, etc., threshold dialog, select a Standard, Differential, or a User

20