Agilent Technologies 16760A manual Short, Medium, Long, Custom, Select Method To Process Results

Chapter 5: Reference

The Eye Scan Tab

	and other anomalies will be displayed if present.
Short	Processes fewer clocks at each scan point. This setting
	requires frequent transitions on all channels.
Medium	Processes a moderate number of clocks at each scan point.
	Use this for channels transition at a normal rate.
Long	Processes more clocks at each scan point. Use this setting
	if some channels have sporadic transitions.
Custom	Lets you enter the number of clocks to process at each
	scan point.
Select Method
to Process
Results	You can choose to process measurement results by
	replacing previous data or by accumulating data.

Replace previous data for each

scanned channel Eye Scan data will be erased at the beginning of each run. This only applies to data for channels which are selected for Eye Scan (using a label or discretely). Data for channels that are not selected will not be erased at the beginning of the run.

Accumulate results from

scan to scan Scan data from each successive run is overlaid on existing data.

See Also “To set advanced eye scan options” on page 121

207