Agilent Technologies 16760A manual Next, Defined threshold voltage Select the Close button

Chapter 1: Getting Started

Probing and Sampling Mode Selection Steps

Defined threshold voltage.

7.Select the Close button.

8.Select the Close button.

To assign names to logic analyzer channels

1.Select a label button, and either:

•Choose the Rename command, enter the label name, and select the OK button.

•Or, choose the Insert before or Insert after command, enter the label name, and select the OK button.

2.In the label row, select the button of the pod that contains the channels you want to assign.

3.Either choose one of the standard channel assignments--dots (.) mean the channel is unassigned, asterisks (*) mean the channel is assigned--or choose Individual.

If you chose Individual:

a.In the "label - pod" dialog, select the channels you want to assign/ unassign.

b.Select the OK button.

Next:

•If you are using the logic analyzer in timing mode or in state mode, go to “Step 4. Define the trigger condition” on page 22.

•If you are using the logic analyzer in eye scan mode, go to “Step 4. Select channels for the eye scan measurement” on page 26.

21