Agilent Technologies 16760A manual Eye Scan Mode, Reload, Save As, Eye Scan Speed

Chapter 5: Reference

The Sampling Tab

	Reload	Reloads eye finder data from the named file, deleting
		unsaved changes.
	Save	Saves current eye finder data to the named file.
	Save As...	Saves current eye finder data to a new file.
See Also	“To automatically adjust sampling positions” on page 49

Eye Scan Mode

When you select Eye Scan Mode, the Eye Scan Mode Controls area appears.

Eye Scan Speed

Configuration Lets you configure the analyzer for faster signals, but with only half of the channels.

Clock Setup Lets you specify the clock edge from the device under test

that will be used as the reference clock.

Generally, the eye scan mode reference clock is taken from the signals that clock valid data in the device under test.

172