Agilent Technologies 16760A To turn labels off or on, To turn a label off, To turn a label on

NOTE:

NOTE:

Chapter 2: Probing and Selecting the Sampling Mode

Formatting Labels for Logic Analyzer Probes

Labels with reordered bits cannot be used as range terms or <, <=,>, >= in triggers.

To turn labels off or on

When you temporarily want to remove a label and its data, you can turn off the label. The label name and its bit assignments are preserved.

In the timing mode's 400 MHz / 32M Sample Transitional or Store Qualified configuration, the logic analyzer only looks for transitions on labels that are turned on. Data is stored for the labels that are turned off, but only when there is a transition on labels that are turned on. If you turn a label on after a run, or re-assign a channel from a label that is turned off to a label that is turned on, be aware that transitions on that label or channel are only coincidental to labels that were turned on at the time of the run.

To turn a label off

1.In the Format tab, select the label button that you want to turn off.

2.Choose Label [ON] to toggle it off. At least one label must remain on.

To turn a label on

1.In the Format tab, select the label button that you want to turn on.

2.Choose Label [OFF] to toggle it on.

To display a label that was off

1.Turn on the label.

2.At the bottom of the window, select the Apply button. The label's data appears in the display windows.

66