Chapter 1: Getting Started

Timing Mode or State Mode Steps

Timing Mode or State Mode Steps

When you have selected the timing or state sampling modes, you need to perform the following steps.

“Step 4. Define the trigger condition” on page 22

“Step 5. Run the measurement” on page 23

“Step 6. Display the captured data” on page 24

Step 4. Define the trigger condition

The trigger is the event in the device under test that you want to capture data around.

1.In the Trigger tab, and in the Trigger Functions subtab, choose the type of trigger you want to specify, and select the Replace button.

22

Page 22
Image 22
Agilent Technologies 16760A manual Timing Mode or State Mode Steps, Define the trigger condition