Agilent Technologies 16760A manual To export label definitions to an Ascii file

Chapter 2: Probing and Selecting the Sampling Mode

Formatting Labels for Logic Analyzer Probes

	To assign label name "Orange" to channels 15 through 5 on pod A3,
	channel 5 on pod A2, and channel 6 on pod A1:
	Orange;A3[15:5];A2[5];A1[6]
	To assign label name "Red" to the K clock of the logic analyzer in slot A:
	Red;CK[AK]
See Also	“To assign probe channels to labels” on page 60
	“To import label names and assignments from a netlist” on page 62
	“To export label definitions to an ASCII file” on page 64
	“To turn labels off or on” on page 66

To export label definitions to an ASCII file

1.In the Format tab, select File from the menu; then, select the Export Labels... menu item.

2.In the File Selection dialog, select the name of the file that will contain the label definitions.

3.Select OK.

See Also	“To assign probe channels to labels” on page 60
	“To import label names and assignments from a netlist” on page 62
	“To import label definitions from an ASCII file” on page 63

To change the label polarity

While negative logic is rare in circuits (the main exception at this time is RAMBUS), you can change the label polarity if the device under test uses negative logic.

1.In the Format tab, select the polarity button (next to the label button) to toggle between positive (+) and negative (-) polarity.

64