PACKAGE CONTENTS
Projector
Instruction
Manual
DIGIOPTIC ™ | IMAGE |
|
| PROCESSOR | |
|
| |
|
| ON |
DigiOptic™ |
| OFF |
|
| |
Image Processor |
|
|
DigiOptic™ Image Processor power supply unit
Support
Remote Control
The carton should contain the following:
- | the projector |
- the DigiOptic™ Image Processor | |
- | the remote control |
- four 1.5V AAA batteries (for remote control) | |
- DigiOptic™ Image Processor power supply unit | |
- three power cables for the projector (EU, UK, USA) | |
- three power cables for the DigiOptic™ Image Processor | |
| (EU, UK, USA) |
- triple fiber optic cable for linking DigiOptic™ Image | |
| Processor and the projector |
Cable
1.5 V AAA- type batteries
Power cables | Cable |
Europe, UK, US (x2) |
Fig.5
- one cable | |
- one cable | |
- | two brackets for mounting the DigiOptic™ Image |
| Processor to the rack. |
- | the user and installation manual. |
If any accessories are missing, contact your Dealer as soon as possible.
4 INSTALLATION
POSITIONING THE TWO UNITS
The HT300 LINK system consists of two separate units (the DigiOptic™ Image Processor and the Projector), each of which is equipped with a power cable; the two units are interconnected by a 20 m fibre optic cable.
The ideal location for the DigiOptic™ Image Processor is on a cabinet shelf or on a rack (dimensions compatible with a stan- dard 19" rack). Make sure that the support surface is stable and that the unit has sufficient space around it for ventilation purposes (at least 3 cm).
The unit is connected to the mains via an external power supply unit with an output of +7 Vdc; the unit’s main power switch is on the power supply unit.
Connect the power supply unit output cable to the POWER socket located on the rear panel (Fig. 2).
Use exclusively the power supply unit provided with the system or an alternative power supply unit expressly approved by SIM2.
To mount the DigiOptic Image Processor on an equipment rack use the screws and RH / LH supports supplied with the appliance. Unscrew the screws that secure the cover to the DigiOptic unit base, position the RH and LH supports and fix into place with the supplied screws. To secure the unit to the rack use the supplied screws (Fig.6).
DIG | IOP |
| TIC“ |
| IM |
| AG |
| E P |
| ROC |
| ESSOR |
| ON |
| OFF |
Fig.6
Position the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling or wall installation.
7