CAUTION: In the case of ceiling or wall mounting using a suspension bracket, follow the instructions carefully and comply with the safety standards you will find in the box together with the bracket. If you use a bracket different to the one supplied by SIM2 Multimedia, you must make sure that the projector is at least 65 mm (2-9/16 inch) from the ceiling and that the bracket is not obstructing the air vents on the lid and on the bottom of the projector.

Position the projector the desired distance from the screen: the size of the projected image is determined by the distance from the lens of the projector to the screen and the zoom setting. See “Appendix C”: Projection distances” for more information.

CONNECTING THE TWO UNITS

The system can be fully controlled using the supplied IR (infrared) remote control handset. There is a single remote control for both the DigiOptic™ Image Processor and the Projector; the remote control can be directed towards either unit since they are both equipped with an IR sensor.

Never pull the individual optical cables or connectors; if necessary, you may pull the main three-core cable.

•Only remove the cap protecting the connector ferrule immediately before inserting the connector; if the ferrule is allowed to come into contact with foreign material it may be damaged, making the connector unusable.

•Take particular care when inserting fibre optic connectors in their respective sockets on the rear panel of the DigiOptic™ Image Processor and the rear panel of the Projector.

•Make sure that the single optical cables are not switched: the numbers on the cables must match the numbers on the connectors (Fig.8-9).

•Check that the connectors are correctly inserted.

•Make sure that the cable does not constitute an obstacle for persons moving around the room.

•Take care not to create knots in the cable; the minimum radius of bends in the cable is 2 cm.

•Prevent the cable from pulling and mechanical stress: this could cause the connectors to be pulled out and damaged.

The connection between the two units is made with a single cable containing three fibre optic cables each terminating in an LC connector. The standard cable length of 20m will be sufficient for most installation requirements.

During installation of the fibre optic cable:

•The individual optical cables are delicate: always handle the main cable without touching the individual optical cables (Fig. 7).

Protective cap

12

 

(RS

232)

 

-

CONTROL

 

3

 

2

 

 

 

1

 

 

 

 

LINK

FIBER

 

CAL

 

 

OPTI

 

 

3

3

Fig.8

Ferrule

Separation point

Connector

Fibre

Fig.7

Fig.9

 

Cable

8

Page 9 Page 11
Page 10
Image 10
Sim2 Multimedia HT300 Link installation manual Connecting the TWO Units
Page 9 Page 11

HT300 Link specifications

The Sim2 Multimedia HT300 Link is a groundbreaking multimedia projector that seamlessly blends high-performance technology with user-friendly design, catering to both home theater enthusiasts and professional environments. Its sleek and compact form factor ensures that it can fit effortlessly into any setup, while delivering exceptional performance that meets the demands of the modern viewer.

One of the standout features of the HT300 Link is its impressive brightness. With a powerful illumination system, it projects vivid images with sharp contrast, ensuring that content displayed remains clear and stunning, even in ambient light conditions. The unit boasts a native resolution of 1080p, which brings a cinematic experience to home viewers with mesmerizing details and color accuracy.

Additionally, the HT300 Link utilizes advanced DLP technology, renowned for its reliability, durability, and ability to render colors that are true to life. DLP ensures a smooth visual experience, reducing the possibility of motion blur, which is especially important for fast-paced action scenes or high-speed sports.

The projector also supports various input options, allowing for versatility in connectivity. It features multiple HDMI ports, USB inputs, and an array of audio outputs, making it easy to connect different devices, including gaming consoles, Blu-ray players, and streaming devices. Furthermore, the HT300 Link integrates wireless connectivity options, enabling users to stream content effortlessly from smartphones, tablets, or laptops.

Thermal management is another area where the HT300 Link excels. Designed with an efficient cooling system, it eliminates the risk of overheating and ensures prolonged operation without compromise to performance. This feature is particularly important for extended viewing sessions, whether in a home theater setting or during business presentations.

The user interface of the HT300 Link is intuitive, making it accessible for users of all levels. With straightforward settings and remote control functionality, users can easily navigate options to customize their viewing experience.

In summary, the Sim2 Multimedia HT300 Link sets a high standard in the realm of multimedia projectors. With its bright projection, advanced DLP technology, versatile connectivity, and user-friendly interface, it is a fantastic choice for anyone looking to elevate their visual experience, whether for entertainment or professional presentations.
Top Page Image Contents