8 ON SCREEN MENU
All system functions can be activated from the keypad or remote control with the aid of a practical and comprehensive system of on screen menus.
INPUTS
The input selection menu (Inputs) is called by pressing 0 on the remote control and, when no other menu is displayed, using the and keys on the keypad. To select an input, scroll the list with the and keys until the desired input is highlighted, then press .
Display of the input selection menu is terminated
by pressing the ESC key, or when the time allowed for displaying the
Inputs 6, 7 and 8 can receive RGB and YCrCb signals, at 15 kHz, 32 kHz or higher. The association between the input and the type of signal is made from the
Inputs
1 | VIDEO 1 | 1 |
|
2 | VIDEO 2 | 2 |
|
3 | 3 |
| |
4 | 4 |
| |
5 | COMP/RGB 5 | 5 | YCrCb 32kHz |
6 | COMP/RGB 6 | 6 | RGBS 15kHz |
7 | COMP/RGB 7 | 7 | YCrCb |
8 | COMP/RGB 8 | 8 | YCrCb 15kHz |
9 | GRAPH RGB 9 | 9 |
|
10 | GRAPH RGB 10 | 10 |
|
11 | 11 | YCrCb | |
12 | HDMI 12 | 12 |
|
Fig. 18a
Inputs |
|
| |
1 | VIDEO 1 | 1 |
|
2 | VIDEO 2 | 2 |
|
3 | 3 |
| |
4 | 4 |
| |
5 | COMP/RGB 5 | 5 | YCrCb 32kHz |
6 | COMP/RGB 6 |
| RGBS 15kHz |
7 | COMP/RGB 7 | 7 | RGBSYCrCb |
8 | COMP/RGB 8 | 8 | YCrCbYCrCb15kHz15kHz |
9 | GRAPH RGB 9 | 9 | YCrCb |
10 | GRAPH RGB 10 | 10 |
|
11 | 11 | YCrCb | |
12 | HDMI 12 | 12 |
|
Fig. 18b
Input 11 is capable of receiving YCrCb or RGB signals coming from
The selection should be made from the drop menu following the indications described above.
After selecting the source signal (by means of the and keys), press MENU+/MENU - to confirm and close the pull- down menu; the value you have just set will be displayed on the right of the < symbol.
As with the other inputs, you can now select the input just set by pressing the key.
During the short time it takes to find the signal, a box appears showing the signal requested. As soon as the signal is shown in the box additional information is displayed concerning the video standard (for video signals) or resolution (for graphic signals), and format.
Fom the SETUP menu it is possible to choose to visualize or not this information, for more details check the “SOURCE INFORMATION” in “MENU” section.
16