by selecting POSITION on the IMAGE ADJUSTMENTS menu.
-Adjust the width and height of image, selecting ASPECT in the IMAGE ADJUSTMENTS menu.
-Adjust the Overscan value in the IMAGE/OVERSCAN menu.
Image too dark, too pale or unnaturally coloured
-Verify compatibility of video/graphic signals with technical specifications of your projector.
-Go to PICTURE menu, select and regulate any of the following, accordingly: CONTRAST, BRIGHTNESS, COLOR, and TINT.
-If necessary, reset the COLOR TEMPERATURE and GAMMA CORRECTION (found on the IMAGE ADJUSTMENTS / ADVANCED SETTINGS menu).
Graphic image with poor quality vertical detail
-Verify compatibility of video/graphic signals with technical specifications of your projector.
-Press A on your remote control or AUTO on keypad to execute automatic adjustments.
-Adjust FREQUENCY and PHASE parameters, found in the IMAGE ADJUSTMENTS menu, to optimise vertical detail of the projected image.
Video Image showing colour misalignment on vertical details
-Verify compatibility of video/graphic signals with technical specifications of your projector.
-Adjust Y/C DELAY settings in the IMAGE ADJUSTMENTS / ADVANCED SETTINGS to reduce colour misalignment. For best results use an external colour bar test pattern source.
Remote control does not work
-Check the batteries and for correct polarity.
-Ensure that the area between the infrared sensor (front of projector) and the remote control is free of obstruction.
-Ensure that infrared sensors (front and rear of projector) are not exposed to intense light levels.
11 OPTIONAL ACCESSORIES
You can purchase the following optional accessories at your Dealer:
- Wall/Ceiling Bracket Kit.
Use only original, or SIM2 Multimedia approved, accessories.
CAUTION: for ceiling/wall installation, by means of suspension bracket, carefully follow the instructions and safety instructions recommended by the Manufacturer in the bracket’s literature.
27
