•Disconnect the apparatus from the mains power supply in the event of electrical storms and when not in use.
To avoid damage that could be caused by lightning striking in the vicinity of your home, disconnect the units in the event of electrical storms or when the system will remain unused for prolonged periods.
•Avoid contact with liquids and exposure to humidity.
Do not use the units near water (sinks, tanks, etc.); do not place objects containing liquids on top of or near the units and do not expose them to rain, humidity, dripping water or spray; do not use water or liquid detergents to clean the units.
•Prevent the units from overheating.
Do not obstruct ventilation openings. Do not place the units near heat sources such as heaters, radiators or other devices that generate heat (including amplifiers). Do not position the units in confined, poorly ventilated places (bookcase, shelves, etc.).
•Do not expose the eyes to the intense light emitted by the lamp.
Never look directly at the lamp through the ventilation opening when the unit is switched on.
Risk of eyesight impairment. Ensure also that children do not look directly at the lamp.
•Position the unit on a stable surface.
To avoid serious injury to persons and damage to property, make sure the units are placed on a level, flat and stable surface from which they cannot fall, tip over or slide. Pay special attention if the units are placed on a trolley so that they can be moved around. Ensure that the units are not subjected to impact.
•Do not insert objects through the units’ openings. Make sure that no objects are inserted inside the units. If this should occur, disconnect the unit from the power supply immediately and call an authorised technician.
3 UNPACKING
To unpack the projector safely and easily please follow steps 1 to 6, as per drawing (Fig. 4).
It is recommended that the carton and packaging is retained for future use and in the unlikely event that your projector needs to be returned for repair.
Fig.4
6
