Alpine TDA-7588RB, CDA-7876RB Dimmer Control, Subwoofer On and Off, 8-EN, Basic Operation

Basic

TUNEMODE

g DN f UP SETUP

Basic Operation

Dimmer Control

Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP button repeatedly to select "DIM."

Each press of the f UP button scrolls the modes as shown:

→FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER∗

DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←

∗CDA-7873R/TDA-7587R Only

NOTE

If you press the g DN button the display scrolls in reverse sequence.

3 Press the TUNE button to select the Dimmer mode.

Each press toggles between "DIM AUTO" and "DIM MANU."

4 Press the SETUP button to activate the normal mode.

Subwoofer On and Off

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP button repeatedly to select "SUB (Subwoofer)."

Each press of the f UP button changes the modes as shown:

→FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER∗

DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←

∗CDA-7873R/TDA-7587R Only

NOTE

If you press the g DN button the display scrolls in reverse sequence.

3 Press the TUNE button to toggle mode between "SUB-W ON" and "SUBW OFF."

4 Press the SETUP button after setting the SUB-W ON.

5 Press the MODE (Audio Control) knob repeatedly to select the SUB-W mode.

→		→
	SUB-W		BAL
VOL ←		FAD ←

If an Ai-NET compatible processor with Subwoofer output is connected:

The subwoofer output phase is toggled SUBW NOR (0° ) or SUBW REV (180° ) by pressing the g DN button or the f UP button.

6 Rotate MODE (Audio Control) knob until the desired sound is obtained in each mode.

8-EN