Cisco Systems OL-7371-02 manual Hardware Settings

Appendix A Voice Cards and PIMG Units

Intel Dialogic D/120JCT-LS and D/120JCT-Euro

Figure A-8 D/120JCT-LS and D/120JCT-Euro Connection Pinouts and Backplate

Pin 1: Unused

Pin 2: Tip 2

Pin 3: Ring 1

Pin 4: Tip 1

Pin 5: Ring 2

Pin 6: Unused

55478

Lines 1 and 2

Lines 3 and 4

Lines 5 and 6

Lines 7 and 8

Lines 9 and 10

Lines 11 and 12

55475

Hardware Settings

To Set the D/120JCT-LS and D/120JCT-Euro Card Switches

Step 1 Set the rotary switch (SW100) to a unique value for each card.

Each Intel Dialogic card in the Cisco Unity server or expansion chassis must have a unique value, starting with 1 and continuing in sequence on subsequent cards. For example, set the rotary switch on the first three voice cards as shown below. This is also the order in which you install the cards in the server.

First card

1

2

Second card

3

Third card

55486

Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)

A-6 OL-7371-02