Cisco Systems OL-7371-02 manual Click Continue

Chapter 5 Customizing the Cisco Unity Platform

Running the Cisco Unity System Preparation Assistant

Step 8 Install SQL Server in the location you made note of in the “Determining the Drive Locations for Files on the Cisco Unity Server” section on page 2-4:

a.In the Welcome dialog box, click Next.

b.In the Computer Name dialog box, click Next to accept the default setting Local Computer.

c.In the Installation Selection dialog box, click Next to accept the default setting Create a New Instance of SQL Server, or Install Client Tools.

d.Follow the on-screen prompts until the CD Key dialog box appears.

e.Enter the key for Cisco Unity Data Store 2000 from the sticker located on the CD sleeve, and click Next.

f.In the Installation Definition dialog box, click Next to accept the default setting Server and Client Tools.

g.In the Instance Name dialog box, check the Default check box.

h.Click Next.

i.In the Setup Type dialog box, click Typical.

j.Under Destination Folder, next to Program Files, click Browse and specify the location for binaries that you made note of in the “Determining the Drive Locations for Files on the Cisco Unity Server” section on page 2-4.

k.Under Destination Folder, next to Data Files, click Browse and specify the location for databases that you made note of in the “Determining the Drive Locations for Files on the Cisco Unity Server” section on page 2-4.

l.Click Next.

m.At the top of the Services Accounts dialog box, click Use the Same Account for Each Service.

n.Under Service Settings, click Use the Local System Account.

o.Click Next.

p.In the Authentication Mode dialog box, we recommend that you click Windows Authentication Mode.

If you click Mixed Mode—which is supported but is less secure—under Add Password for the SA Login, enter and confirm a password for the SQL Server system administrator logon.

q.Click Next.

r.In the Start Copying Files dialog box, click Next.

s.In the Choose Licensing Mode dialog box, click Processor License For, and specify the number of processors in the Cisco Unity server.

t.Click Continue.

u.If you are prompted about shutdown tasks before continuing with the installation, click Next.

v.Click Finish.

w.Skip to Step 9.

Step 9 When SQL Server installation is complete, continue following the on-screen prompts in the assistant to complete the platform customization.

Step 10 Install SQL Server Service Pack 3a:

a.On the Welcome screen, click Next.

b.Follow the on-screen prompts until you are prompted to choose the authentication mode.

Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)

OL-7371-02 5-7