Cisco Systems OL-7371-02 manual Voice Cards and Pimg Units appendix

Chapter 3 Setting Up the Hardware

Attaching Peripheral Devices and Making Connections from the Phone System

Step 3 Make the connections from the phone system, depending on whether the system is using voice cards or PIMG units for the integration:

Voice cards with a	Connect the phone system to the Cisco Unity server as described in the
circuit-switched phone system	applicable Cisco Unity integration guide for the phone system.
	For pinout information, see the applicable voice card section in the
	“Voice Cards and PIMG Units” appendix.
PIMG units with a	Connect the phone system to the PIMG units as described in the
circuit-switched phone system	applicable Cisco Unity integration guide for the phone system.
	For pinout information, see the “Intel NetStructure PBX-IP Media
	Gateway (PIMG)” section on page A-11.

Cisco Unity integration guides are available at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_and_configuration_g uides_list.html.

Step 4 If you are installing the Cisco Unity system outside the United States and the server contains voice cards that came with a ferrite clamp, attach the clamp around the analog phone lines as close to the server as possible.

Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)

3-6 OL-7371-02