
Chapter 4 Installing the Operating System
Installing Windows Server 2003 or Windows 2000 Server
Step 5 Enter a name for the Cisco Unity server (netBIOS name). Use only alphabetical characters A to Z and a to z, numerical characters 0 to 9, and hyphens
Caution Using other characters in the server name is not supported by DNS.
The server name must be 15 characters or fewer in length.
Step 6 Specify and confirm a password, then click Next.
Step 7 Follow the
Step 8 Click Typical Settings, and click Next.
Step 9 In the Workgroup or Computer Domain dialog box, click No, This Computer Is Not on a Network, or
Is on a Network Without a Domain.
If the Workgroup or Computer Domain box is empty, enter a workgroup name. The name you enter now is not important. You will join a domain or make the Cisco Unity server a domain controller in a later procedure, so the Cisco Unity server will no longer be in a workgroup.
Step 10 Click Next.
Step 11 Follow the
Step 12 When the Windows 2000 Configure Your Server dialog box appears, click I Will Configure This Server Later, and click Next.
Step 13 Uncheck the Show This Screen at Startup check box, and close the window.
Windows 2000 Server: Using the Manufacturer’s Guided
The server manufacturer provides a disc that contains utilities for several setup tasks, including guiding the installation of Windows 2000 Server from a retail disc. Use the manufacturer disc when the Cisco Unity server was not purchased from Cisco.
The following discs are provided by server manufacturers:
| |
|
|
IBM | IBM ServerGuide |
|
|
Installing Windows 2000 Server by using the manufacturer’s guided
Caution Do not attach the network cable to the server until you have installed the Microsoft service packs and updates recommended for use with Cisco Unity. The Cisco Unity installation guide alerts you when to install the service packs and updates, and when to connect to the network later in the installation process.
Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)
|
|
| |
|
|