Alpine CDA-9887 owner manual 37-EN, Specifications

Models: CDA-9887

1 51
Download 51 pages 42.22 Kb
Page 39
Image 39
Specifications

OFF AIR

(XM mode)

I ACQUIRING SIGNAL I (SIRIUS mode)

The channel currently selected has stopped broadcasting. - Select another channel.

1------------

1

The user has selected a channel number that does not exist or is not subscribed to.

-The unit will revert back to the previously selected channel.

There is no artist name/feature, song/program title, or additional information associated with the channel at that time.

-No action needed.

Error

If an error or other problem occurs.

- Change channels or consult your Alpine dealer.

NoiPod

The iPod is not connected.

-Make sure the iPod is correctly connected (refer to "Connections").

Make sure the cable is not bent excessively.

NO SONG

There are no songs in the iPod.

- Download songs to the iPod and connect to this unit.

INO PODCAST I

There is no podcast data in the iPod.

- Download podcast data to the iPod and connect to this unit.

Error 01

Communication error

-Turn the ignition key off, and then set to ON again.

-Check the display by reconnecting between the iPod and this unit, using the iPod cable.

Error 02

Caused by the iPod Software Version not being compatible with this unit.

-Update the iPod Software Version to be compatible with this unit.

Specifications

FM TUNER SECTION

 

Tuning Range

87.7-107.9 MHz

Mono Usable Sensitivity

9.3 dBf (O.~ JlV/75 ohms)

50 dB Quieting Sensitivity

13.5 dBf (1.3 JlV/75 ohms)

Alternate Channel Selectivity

80 dB

Signal-to-Noise Ratio

65 dB

Stereo Separation

35 dB

Capture Ratio

2.0 dB

AM TUNER SECTION

 

Tuning Range

530-1,710 kHz

Sensitivity (lEC Standard)

22.5 JlV/27 dB

CD PLAYER SECTION

 

Frequency Response

5-20,000 Hz (±1 dB)

Wow & Flutter (% WRMS)

Below measurable limits

Total Harmonic Distortion

0.008% (at 1 kHz)

Dynamic Range

95 dB (at 1 kHz)

Signal-to-Noise Ratio

105 dB

Channel Separation

85 dB (at 1 kHz)

PICKUP

 

Wave length

795 nm

Laser power

CLASS I

REMOTE CONTROL

 

Battery Type

AAA batteries (2 pcs.)

Width

42 mm (1-21/32")

Height

121 mm (4-25/32")

Depth

23 mm (29/32")

Weight

50 g (1.8 oz)

GENERAL

 

Power Requirement

14.4 V DC

 

(11-16 V allowable)

Power Output

18 W RMS x 4*

*Primary amplifier ratings per CEA-2006 Standard

Power output: measured at 4 Ohms and ~ 1% THD+N

SIN: 80 dBA (reference: 1 W into 4 Ohms)

Maximum Pre-Output Voltage

4 V/1 0 k ohms

Bass

+14/-14 dB at 100 Hz

Treble

±14 dB at 10 kHz

Weight

1.5 kg (3 lbs. 4 oz)

CHASSIS SIZE

 

Width

178 mm (7")

Height

50 mm (2")

Depth

160 mm (6-1/4")

NOSEPIECE SIZE

 

Width

170 mm (6-3/4")

Height

46 mm (1-13/16")

Depth

24 mm (15/16")

Due to continuous product improvement, specifications and design are subject to change without notice.

37-EN

Page 39
Image 39
Alpine CDA-9887 owner manual 37-EN, Specifications