Alpine CDE-9874E, CDE-9872E Lowering Volume Quickly, Setting Time, Listening to Radio

68-09359Z38-A_F.book Page 7 Tuesday, September 4, 2007 4:15 PM

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press /MUTE (CDE-9874E only) or MUTE/SETUP (CDE-9872E only) to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing /MUTE (CDE-9874E only) or MUTE/SETUP (CDE-9872E only) again will bring the audio back to its previous level.

Setting Time

1 Press and hold SOUND/SETUP (CDE-9874E only) or MUTE/SETUP (CDE-9872E only) for at least

2 seconds to activate the SETUP mode.

2 Turn the Rotary encoder (CDE-9874E only) or

press and (CDE-9872E only) to select the CLOCK ADJ mode, and then press / /ENT.

The time indication will blink.

3 Turn the Rotary encoder (CDE-9874E only) or

press and (CDE-9872E only) to adjust the hours while the time indication is blinking.

4 When the hour has been adjusted, press / /ENT.

5 Turn the Rotary encoder (CDE-9874E only) or

press and (CDE-9872E only) to adjust the minutes while the time indication is blinking.

6 Press and hold SOUND/SETUP (CDE-9874E only) or MUTE/SETUP (CDE-9872E only) for at least 2 seconds to return to normal mode.

•To synchronize the clock to another clock/watch or radio time

announcement, press and hold / /ENT for at least 2 seconds after setting the “hour.” Minutes will reset to “00”. If the display shows over “30” minutes when you do this, the time will advance one hour.

•Pressing /MUTE (CDE-9874E only) or /AUDIO (CDE-9872E only) will return to the previous mode.

•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Controllable with Remote Control

This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the re- mote-control sensor.

Remote control sensor

CDE-9874E

Controllable with Remote Control

This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the re- mote-control sensor.

Remote control sensor

CDE-9872E

01GB04CDE9874E.fm

Radio

CDE-9874E

SOURCE/

TUNE/A.MEBAND

Preset buttons (1 through 6)

CDE-9872E

SOURCE/

TUNE/A.MEBAND

Preset buttons (1 through 6)

Listening to Radio

1 Press SOURCE/ to select TUNER mode.

2 Press BAND repeatedly until the desired radio band is displayed.

F1 (FM1) F2 (FM2) AM F1 (FM1)

3 Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK

•The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4 Press	or		to tune in the desired station.
Holding down		or	will change the frequency
continuously.

7-EN

ALPINE CDE-9874E 68-09359Z38-A (EN)