2 Set discs in the disc tray with the labeled side facing up. Set one disc in the tray at a time (up to 6 discs).
Be careful not to drop the disc.
After loading the discs, push the disc tray fully into the magazine until it closes and a click is heard.
Removing discs
1 Grasp the sliding door knob and slide the door fully to the right.
Disc tray
3 Grasp the sliding door knob and slide the door fully to the right.
Sliding door
4 Make sure the magazine is in the proper direction (top/bottom and front/back), then push it in fully until a click is heard and the magazine is locked in place.
5 After inserting the magazine, grasp the tab of the sliding door and slide the door all the way to the left until it locks with a “click”.
•When the magazine is inserted, a check of the disc inside the magazine is performed automatically.
Sliding door
2 Press the eject button to eject the magazine, then remove the magazine.
Eject button
3 Pull the tray removal knob with your finger and draw the disc tray out of the magazine.
Pay attention to the disc’s signal surface when removing discs. (See “PRECAUTIONS” on page 4.)
Magazine | Tray removal knob |
•Do not remove the disc tray from the magazine.
When the disc tray is pulled out from the magazine, do not pull it out with excessive force. Doing so will cause breakdown.
Cautions on using the magazine
•This product’s magazine is used exclusively for this product. CD changer magazines (included magazines or accessories) cannot be used with this product.
•Disc trays for CD changer magazines cannot be used with this product’s magazine. Such trays can be inserted for reasons of structure, but using them may damage this product. Never use disc trays for CD changer magazines.
•Do not forcibly remove the magazine.
•Only one disc can be inserted per tray. Attempting to insert two or more discs will result in damage.
•Never remove the tray from the magazine.
•Even when the ignition key is set to OFF, the magazine can be removed.
