Connecting an Ai-NET compatible AV head unit / Digital Audio Processor

Change the system switch on the AV

head unit to “EQ/DIV”.

 

 

 

 

AV Head Unit

 

 

 

 

 

 

 

 

IVA-D105R, etc. (sold separately)

 

Ai-NET Connector

 

 

 

 

 

 

 

 

 

 

 

 

 

Ai-NET Input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ai-NET Cable

Connector

AUX Video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote Control

 

 

 

 

 

 

 

 

 

 

Output Lead

Fiber Optic Cable

 

 

 

 

 

 

 

 

 

(white/brown)

Digital Input

 

 

 

 

 

 

(sold separately)

 

 

 

 

 

 

 

 

 

Terminal (Optical)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Changer)

Digital Audio Processor

PXA-H701, etc. (sold separately)

Ai-NET Input

Connector

(CHANGER IN)

RCA Extension Cable (included)

Remote Control

Digital Output

Ai-NET Cable (included)

Input Lead

Terminal

 

(white/brown)

 

(Optical)

 

 

Ai-NET Connector

 

 

 

 

 

 

 

Setting of DHA-S690

Video Output

 

 

The DHA-S690’s system settings must be

 

 

made after connections are completed.

Connector

 

 

 

 

 

Before fixing the unit in place, refer to

 

 

 

 

 

 

 

 

 

 

page 41 to change the system setting.

 

 

 

DHA-S690

System Switch

 

 

 

 

1 2

Switches to “1”.

Be sure to switch the head unit’s system switch before turning the power on.

Be sure to make the setting (DVD CHG or CD CHG) in “Setting the Connected Head Unit” (page 21) according to the connected Ai-NET compatible head unit.

If CD CHG is set in “Setting the Connected Head Unit” (page 21):

If you want to play back a DVD Audio, set “Switching the input (non Ai-NET connections)” on the connected Alpine audio processor (PXA-H700, PXA-H701) to “Analog.” For details on operation, refer to the Owner’s Manual of the audio processor.

The switched Power Lead (Ignition) connection is not needed.

Also refer to the operating instructions of the other products in the system.

When connecting the optical digital output to a digital audio processor, be sure to make connection to the CHANGER connectors of the digital audio processor optical digital input connectors. This arrangement allows you to enjoy Dolby Digital 5.1 Channel Surround and other effects even when connection is made to the CHANGER connectors.

Observe the following when using Fiber Optic Cable.

Be careful not to bend the fiber optic cable at a sharp angle.

Do not coil the fiber optic cable smaller than a 30 mm radius.

Do not place anything on top of the fiber optic cable.

43-EN

Page 45
Image 45
Alpine DHA-S690 owner manual 43-EN, Changer