Indication
DISC ERROR
•Mechanism error.
1)Press c and eject the magazine (disc).
If the disc does not eject, press c again for at least 3 seconds and eject the magazine (disc).
If the disc still does not eject, consult your Alpine dealer.
2)When the error indication remains after ejecting, press c again.
If the error indication still does not turn off after pressing c a few times, consult your Alpine dealer.
•The temperature in the car is too low.
- Raise the temperature in the car to normal temperature.
NO DISC
•No disc is inserted. - Insert a disc.
•Remote control operation is not possible.
-For some discs or playing modes, certain operations are not possible. This is not a malfunction.
(When the red 
indicator is displayed, disc operation is prohibited.
When the white 
indicator is displayed, unit playback is prohibited.)
LOADING ERROR
EJECT ERROR
•Mechanism error.
1)Press c and eject the magazine (disc).
If the disc does not eject, turn the power off once and then on again, then press c for at least 3 seconds and eject the magazine (disc).
If the disc still does not eject, consult your Alpine dealer.
2)When the error indication remains after ejecting, press c again.
If the error indication still does not turn off after pressing c a few times, consult your Alpine dealer.
VIDEO SIGNAL
SYSTEM IS NOT
CORRECT
•Displays if a disc differs from the setting on the device. - Sets in “Setting the TV System” (page 21).
REGIONAL CODE
VIOLATION
•Disc does not match regional code number.
- Load a disc that matches the regional code number.
•Protective circuit is activated at high temperature.
-The indicator will disappear when the temperature returns to within operation range.
-Leave the power OFF until the temperature decreases and then turn the power ON again.
