Alpine VPA-B211A owner manual Navigation System Optional, Auxiliary Device Optional, 17-EN

Navigation System

(Optional)

SOURCE

Switching the Navigation Screen

If an optional Alpine Navigation System is connected to the unit, the Navigation screen can be displayed on the monitor.

1 Press SOURCE to activate the NAV. mode.

The Navigation screen is displayed.

The operation is possible with the supplied navigation remote control.

For navigation operation, refer to the Owner’s Manual of the navigator.

•NAV. set to on by following “Setting the Navigation Mode” (page 8).

Auxiliary Device

(Optional)

SOURCE BAND/PRESET

Operating Auxiliary Devices

To operate your devices connected to the AUX terminals of VPA-B211A, follow the procedure described below.

WARNING

It is dangerous (and illegal in many states) for the driver to watch the TV/Video/DVD while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.

Install the VPA-B211A correctly so that the driver cannot watch TV/Video/DVD unless the vehicle is stopped and the emergency brake is applied.

If the VPA-B211A is not installed correctly, the driver will be able to watch the TV/Video/DVD while driving the vehicle and may be distracted from looking ahead and cause an accident. The driver or other people could be severely injured.

17-EN