Alpine VPA-B211A Turning Power On and Off, Initial System Start-Up, Lowering Volume Quickly

Turning Power On and Off Other Useful Features

Some of this unit's functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations.

Press POWER to turn on/off the unit.

Initial System Start-Up

Be sure to press the RESET button when using the unit for the first time, after installing the CD changer, after changing the car battery, etc.

1 Turn off the unit power.

2 Press RESET with a ball-point pen or similar pointed object.

RESET

Lowering Volume Quickly

Activating this function will instantly lower the volume level.

Press MUTE.

No volume is output.

Pressing MUTE again brings the audio back to its previous level.

Switching a Source

Press SOURCE.

•Source can be switched by setting FRONT on the VIDEO SOURCE SEL screen. Refer to “Switching Each Monitor Source (VIDEO SOURCE SELECT Function)” (this page).

8

g f

9-/J/SEARCH

MUTE

Switching Each Monitor Source (VIDEO SOURCE SELECT Function)

If the optional expansion box (VPE-S431) is connected, you can connect up to 2 external rear monitors.

The source is switched between the external front monitor and the external rear monitor using the VIDEO SOURCE SELECT function.

1 Press and hold MUTE for at least 2 seconds.

The SETUP screen is displayed.

2 Press 8 or 9 to select VIDEO SOURCE SEL. 3 Press -/J/SEARCH or f.

The VIDEO SOURCE SEL. screen is displayed.

4 Press 8 or 9 to select a monitor from which the source of FRONT/REAR 1/REAR 2 is set.

FRONT: External front monitor

REAR 1: External rear monitor connected to AUX OUT1 of the optional expansion box (VPE- S431).

REAR 2: External rear monitor connected to AUX OUT2 of the optional expansion box (VPE- S431).

5 Press gor fto select the desired source.

6 To return to the SETUP screen, select RETURN and press -/J/SEARCH or g.

To finish the setting, press and hold MUTE for at least 2 seconds.

6-EN