Alpine VPA-B211A Optional, Playing DVD/Video CD, Fast-forwarding/Fast-reversing, 10-EN

Models: VPA-B211A

1 84
Download 84 pages 2.23 Kb
Page 11
Image 11

DVD/Video CD Operation

(Optional)

SOURCE

REPEAT

8

g f

9:/J/SEARCH

Basic operations of an ALPINE DVD player/Changer compatible with Ai-NET can be done from the unit's supplied remote control. Refer to the Owner's Manual of the connected DVD player/Changer.

Playing DVD/Video CD

WARNING

It is dangerous (and illegal in many states) for the driver to watch the DVD/TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.

Install the VPA-B211A correctly so that the driver cannot watch DVD/TV/Video unless the vehicle is stopped and the emergency brake is applied.

If the VPA-B211A is not installed correctly, the driver will be able to watch the DVD/TV/Video while driving the vehicle and may be distracted from looking ahead causing an accident. The driver or other people could be severely injured.

To display the DVD mode screen

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1.Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2.Keep pushing the foot brake and release the parking brake once then engage it again.

3.While the parking brake is being engaged the second time, release the foot brake.

For automatic transmission vehicles, place the transmis- sion lever in the Park position.

Now, the locking system for the DVD mode operation has been released. Engaging the parking brake can reactivate the DVD mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the DVD mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To display the DVD mode screen.”

If you try to activate the auxiliary device while driving, the display will show the warning-PICTURE OFF FOR YOUR SAFETY.

1 Press SOURCE to activate the DVD mode.

Playback starts.

2 Press either 8 or 9 to select a disc (DVD changer connected).

Fast-forwarding/Fast-reversing

1 During playback, press and hold g(fast- reverse) or f(fast-forward) .

2 Release gor fto return to normal playback.

Finding the Beginning of Chapters or Tracks

During playback, press gor f.

The chapter/track switches each time the button is pressed, and playback of the selected chapter/track starts.

f: Press this to start playback from the beginning of the following chapter or track.

g: Press this to start playback from the beginning of the current chapter or track.

• Some DVDs do not have chapters.

Supplementary explanation

“Chapters” are divisions of movies or musical selections on DVDs.

“Tracks” are divisions of movies or musical selections on video and music CDs.

10-EN

Page 11
Image 11
Alpine VPA-B211A Optional, Playing DVD/Video CD, Fast-forwarding/Fast-reversing, To display the DVD mode screen, 10-EN