Marantz SR6400 Basic Operation, Selecting An Input Source, Selecting The Surround Mode, Sound

BASIC OPERATION

(PLAY BACK)

SELECTING AN INPUT SOURCE.

Before you can listen to any input media, you must first select the input source on the SR6400.

Example : DVD

ER SR6400

SELECTING THE SURROUND MODE

Example : AUTO SURROUND

AV SURROUND RECEIVER SR6400

SELECTOR

		CLEAR	MEMORY
SELECT	ENTER
	TV	DVD	VCR1	DSS/V
POWER ON/STANDBY	PHONES

ADJUSTING THE TONE (BASS &			TEMPORARILY TURNING OFF THE				ENGLISH
TREBLE) CONTROL.			SOUND
	AV SURROUND RECEIVER SR6400
	SELECTOR
						VOLUME
	CLEAR	MEMORY
			F/P	MODE	DOWN	UP
SELECT	ENTER
					MUTE	ATT
	TVDVD	VCR1 DSS/VC
			TAPE	CD	TUNER
POWER ON/STANDBY	PHONES					AUX INPUT

CLEAR		MEMORY		TUNING		F/P		MODE
TV	DVD	VCR1	DSS/VCR2	AUX	CD-R	TAPE	CD	TUNER

To select the surround mode during playback, turn the SELECT knob on the front panel or press the surround mode button on the remote .

ADJUSTING THE MAIN VOLUME

During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics.

(Using the SR6400)

To change the selector mode , press the SELECT button, until "BASS" or "TREBLE" is shown on the front display.

To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the front panel or MUTE button on the remote.

This will interrupt the output to all speakers and the head-phone jack, but it will not affect any recording or dubbing that may be in progress.

When the system is muted, the display will show

To select DVD, simply press the DVD button on the
front panel or press the DVD button on the remote.
After you have selected DVD, simply turn on the	VOLUME
DVD player and play the DVD.

Turn the SELECTOR knob to the desired level of tone control.

(Using the remote control unit)

“MUTE” .

Press the MUTE button again to return to normal operation.

•As the input source is changed, the new input name will appear momentarily an OSD information on the video display. The input name will also appear in the display, on the front-panel.

•As the input is changed, the SR6400 will automatically switch to the digital input, surround mode, attenuation, and night mode status which were entered during the configuration process for that source.

•When an audio source is selected, the last video input used remains routed to the VCR1 & DSS/ VCR2 Outputs and Monitor Outputs. This permits simultaneous viewing and listening to different sources.

•When a Video source is selected, the video signal for that input will be routed to the Monitor Outputs jacks and will be viewable on a TV monitor connected to the SR6400.

If a component video input is connected to the DVD or DSS component inputs, it will be routed to the Component Video Output. Make certain that your TV is set to the proper input to view the signal.

	F/P	MODE	DOWN	UP
			MUTE	ATT
CD-R	TAPE	CD	TUNER

AUX INPUT

Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOL

/buttons on the remote.

To increase the volume, turn the VOLUME knob clockwise or press VOL button on the remote, to decrease the volume, turn counterclockwise or press VOL button on the remote.

Notes:

•The volume can be adjusted within the range of – ∞ to 18 dB, in steps of 1 dB.

•However, when the channel level is set as described on page 17, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB.

(In this case the maximum volume adjustment range is “18 dB - Maximum value of channel level)

To adjust the bass effect , press BASS or BASS on the remote.

To adjust the treble effect , press TREBLE or TREBLE on the remote.

Notes :

•The tone control function can work in the AUTO Surround, Stereo, Dolby PL2, DTS, DTS-ES, and Multi Ch. Stereo mode.

19