Marantz SR6400 manual 3.2, Listening To The Tuner, Preset Memory, Basic Operation, English

BASIC OPERATION

MANUAL TUNING (FM) TUNING MODE (AUTO STEREO OR MONO)

1. To select FM , press the TUNER button on the

front panel.

(TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country’s standard is 9 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change.

Note:

•Preset memory for the tuner will clear by changing this setup.

AUTO TUNING

3.2. 1.

2.

R	MEMORY		TUNING		F/P	MODE	DOWN
							MUTE
DVD	VCR1	DSS/VCR2	AUX	CD-R	TAPE	CD	TUNER

3.2. 1.

2.

R	MEMORY		TUNING		F/P	MODE	DOWN
							MUTE
DVD	VCR1	DSS/VCR2	AUX	CD-R	TAPE	CD	TUNER

1.

(Using the SR6400)

1. To select tuner and desired band (FM or AM),

press the TUNER button on the front panel

2. Press the F/P (Frequency/Preset) button on

front panel, to have the frequency appear on the display.

3. Press the TUNINGorbuttons.

(Using the remote control unit)

1. To select tuner and desired band (FM or AM), press the TUNER button twice within in two seconds on the remote.

2. Press the 5 or 6 on the remote to tune in the desired station.

				VOLUME
G	F/P	MODE	DOWN	UP
			MUTE	ATT
CD-R	TAPE	CD	TUNER

AUX INPUT

When in the auto stereo mode, AUTO indicator will be illuminated on the display.

The “ST” indicator is illuminsted when a stereo broadcast is tuned in.

At open frequencies, the noise is muted and the “TUNED” and “ST” indicators are not illuminated. If the signal is weak, it may be difficult to tune into the station in stereo. In such a case, press the MODE button on the front panel or press the T.MODE button on the remote.

“AUTO” indicator is not illuminated, if FM stereo broadcasts are received in monaural and the “ST” indicator is not illuminated.

To return to auto stereo mode, press the MODE button or press T.MODE button on the remote again. AUTO indicator is illuminated the display.

2.	While pressing the MEMORY button, press	ENGLISH
	the TUNING button up.
	“AUTO PRESET” will appear on the display,
3.	and scanning starts from the lowest frequency.
	Each time the tuner finds a station, scanning
	will pause and the station will be played for
	five seconds.
	During this time, the following operations are
	possible.
4.	The band can be changed by the TUNER button.
	If no button is pressed during this period, the
	current station is memorized in location Preset
	02.
	If you wish to skip the current station, press the
	TUNING button during this period, this station
5.	is skipped and auto presetting continues.
	Operation stops automatically when all 50

preset memory positions are filled or when auto scanning attains the highest end of all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.

MANUAL PRESET MEMORY

1.

DIRECT FREQUENCY CALL

2. 4. 3.

(Using the SR6400)

1. To select tuner and desired band (FM or AM), press the TUNER button on the front panel.

2. F/P button on the front panel to display the frequency.

3. Press the TUNINGorbutton on the front panel for more than 1 second to start the Auto tuning function.

4. Automatic searching begins then stops when a station is tuned in.

(Using the remote control unit)

1. To select tuner and desired band (FM or AM), press the TUNER button twice within in two seconds on the remote.

2. Press the 5 or 6 for more than 1 second on the remote.

3. Automatic searching begins then stops when a station is tuned in.

If tuning does not stop at the desired station, use to the “Manual tuning” operation.

2.

3.

1.

1. To select tuner and desired band (FM or AM), press the TUNER button twice within two seconds on the remote.

2. Press the F.DIR on the remote, display will show “FREQ - - - -”.

3. Input your desired station’s frequency with the ten numbered keypad on the remote.

4. The desired station will automatically be tuned.

PRESET MEMORY

With this unit you can preset up to 50 FM/AM stations in any order.

For each station, you can memorize the frequency and reception mode if desired.

AUTO PRESET MEMORY

This function automatically scans the FM and AM band and enters all stations with proper signal strength into the memory.

5.	2.	2.4.			1. 3.
SELECTOR
	CLEAR	TUNING	F/P	MODE	DOWN	UP
TV	DVD	VCR1	TAPE	CD	TUNER

AUX INPUT

RECEIVER SR6400
									3.
	CLEAR		MEMORY		TUNING		F/P		M
S	TV	DVD	VCR1	DSS/VCR2	AUX	CD-R	TAPE	CD	2.

(Using the SR6400)

1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).

2. Press the MEMORY button on the front panel. “– –“ (preset number) starts blinking on the display.

3. Select the preset number by pressing the TUNINGorbutton, while this is still blinking (approx. 5 seconds)

4. Press the MEMORY button again to enter. The display stops blinking.

The station is now stored in the specified preset

memory location.

25