Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances.
Begin by determining the ideal or most commonly used seating position in the room.
This is important for the timing of the acoustics to create the proper sound space that the SR6400 and today’s sound systems are able to produce.
Note : For speakers that you have selected “None” the Speaker Configuration
2 - 2 S P E AK E R S | D I S T ANC E |
| ||||
F RON T | L | : | 1 0 | f t | 3 . 0 | m |
F RON T | R | : | 1 0 | f t | 3 . 0 | m |
C E N T E R |
| : 1 0 f t | 3 . 0 m | |||
S URR . L |
| : | 1 0 | f t | 3 . 0 | m |
S URR . R |
| : | 1 0 | f t | 3 . 0 | m |
S UB W |
| : 1 0 f t | 3 . 0 m | |||
S URR . BACK : | 1 0 | f t | 3 . 0 | m | ||
MA I N | R E T URN | N E X T | E X I T | |||
1. To select each speaker , press the
or
cursor buttons.
2. To set the distance for each speaker , press the
or
cursor buttons.
3. After you complete this portion of the set up, move the cursor to “NEXT” with the
or
cursor buttons and then press the OK button to go to the next page.
FRONT L :
Set the distance from the front left speaker to your normal listening position between 1 and 30 feet in 1.0 foot intervals (0.3 to 9 meters in 0.3- meter intervals).
FRONT R :
Set the distance from the front right speaker to your normal listening position between 1 and 30 feet in 1.0 foot intervals (0.3 to 9 meters in 0.3- meter intervals).
CENTER :
Set the distance from the center speaker to your normal listening position between 1 and 30 feet in 1.0 foot intervals (0.3 to 9 meters in
SURR. L:
Set the distance from the surround left speaker to your normal listening position between 1 and 30 feet in 1.0 foot intervals (0.3 to 9 meters in 0.3- meter intervals).
SURR. R :
Set the distance from the surround right speaker to your normal listening position between 1 and 30 feet in 1.0 foot intervals (0.3 to 9 meters in 0.3- meter intervals).
SUB W :
Set the distance from the subwoofer to your normal listening position between 1 and 30 feet in
(0.3 to 9 meters in
SURR. BACK:
Set the distance from a surround back speaker to your normal listening position between 1 and 30 feet in
Notes
•For the speakers that you have selected "None" the Speaker Size menu will not appear.
Here you will set the volume for each speaker so that they are all heard by the listener at the same level. We recommend using a SPL (Sound Pressure Level) meter, when available.
Note:
•The speaker level settings are not available in 6.1 channel input mode and
2 - 3 S P E AK E R S L E V E L
T E S T | MOD E | : | MANUA L | |
F RON T | L | : | 0 | d B |
C E N T ER | : | 0 | d B | |
F RON T | R | : | 0 | d B |
S URR . R | : | 0 | d B | |
S URR . B ACK | : | 0 | d B | |
S URR . L | : | 0 | d B | |
S UB W | : | 0 | d B | |
MA I N RE T URN |
|
| E X I T | |
TEST MODE :
Selects “MANUAL” or “AUTO” for generating the mode of the test tone with the
or
cursor buttons.
If you select “AUTO” , the test tone will be cycled through in a circular pattern which is Left →Center → Right → Surround Right → Surround Back → Surround Left → Subwoofer → Left → .. increments of 3 seconds for each channel.
Using the
or
cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all the speakers.
If you select “MANUAL”, adjust the output level of each speaker as listed below.
1. When you move the cursor to FRONT L by pressing the
cursor button, the SR6400 will emit a pink noise from the front left speaker.
Remember the level of this noise and then press the
cursor button.
(Note that this can be adjusted to any level between
The SR6400 will now emit the pink noise from the center speaker.
2. Using the
and cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker.
3. Press the
cursor button again. The SR6400 will now emit the pink noise from the front right speaker.
4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.
After you complete this portion of the set up, press the OK button, the cursor will move to “MAIN” and then press the OK button to go to SETUP MAIN MENU.
Notes:
•Speakers that you selected “None” for in the Speaker Size menu will not appear.
•To adjust the speaker levels for
3 PREFERENCE
3 P R E F E RE NC E |
|
|
S T ANDB Y MODE | : | E CONOMY |
T V - AU T O | : | ∗∗∗ |
OS D I N F O | : E NAB L E | |
| MA I N | E X I T |
|
1. | Select “PREFERENCE” in the SETUP MAIN | ||
| MENU with the | or cursor buttons, and press | |
2. | the OK button. |
|
|
To select a desired content, press the or | |||
cursor buttons.
STANDBY MODE:
When this function is set to “ECONOMY”, you can reduce the power consumption when the unit is in the standby mode.
Note:
•
TV AUTO:
Select the TV AUTO ON/OFF function to enable or disable with the or cursor buttons. (refer to page 23)
OSD Info:
Select the OSD information function to enable or disable with the or cursor buttons.
If you select “ENABLE”, the SR6400 will display the status of the feature (Volume up/down, input select, etc..) on the TV monitor. But if you do not desire this information, select “DISABLE ”.
After you complete this portion of the set up, move the cursor to “MAIN” with the or cursor buttons and press the OK button.
ENGLISH
17
