REMOTE CONTROL RANGE
The distance between the transmitter of the remote control and the IR SENSOR of the SR6400 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible.
SR6400
3. Close the cover until it clicks. | AMP MODE |
Note:
• The supplied batteries are shipped to confirm the initial operation. Therefore, the supplied batteries will be consumed quickly.
POWER ON/OFF Turns the SR6400 on and off | |
POWER ON | Turns the SR6400 on |
|
|
POWER OFF | Turns the SR6400 off |
|
|
Turns on or off the Video OFF mode | |
|
|
EQ | Turns on or off the |
|
|
7.1/6.1 IN | Selects the 6.1CH IN |
|
|
SLEEP | Sets the sleep timer function |
|
|
A/D | Switches between the analog and digital inputs |
|
|
DISP./RDS | Changes the front display mode |
|
|
Surround mode | Selects the surround mode |
* DSP button is unavailable to SR6400. | |
Selects the Source Direct mode | |
|
|
NIGHT(+10) | Turns on or off the NIGHT mode |
ENGLISH
60°
Remote control unit (RC7300SRa)
GENERAL INFORMATION OF
RC7300SRa TO SR6400
To control the SR6400 by your RC7300SRa, you have to select the device AMP or TUNER by pressing the function selector button. Please refer below for the details in AMP and TUNER mode.
MUTE | Decreases the sound temporarily |
BASS 34 | Adjusts the tone control of low frequency sound |
|
|
TREBLE 34 | Adjusts the tone control of high frequency sound |
|
|
VOL 34 | Adjusts the over all sound level |
|
|
MENU/OSD | Displays the current setting on the monitor |
|
|
Cursor | Moves the cursor for settings in the “On screen display” mode |
|
|
OK | • Enters the “On screen display” |
|
|
| •Confirms the settings in “On screen display” mode |
|
|
SETUP | Same as the OK button |
|
|
CH SEL | Calls up SETUP MENU and adjusts speaker levels or 6.1ch input level |
LOADING BATTERIES
The life of the batteries used with the remote control is about 4 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak.
1. Remove the back cover.
TUNER MODE
2. Insert the new batteries (AA type) with correct
(+) and
TEST | Enters the test tone menu |
EXIT | Exits from the SETUP MAIN MENU |
|
|
SPKR A/B | Selects the speaker system |
|
|
ATT | Reduces the input level |
|
|
Function selector | Selects a particular source component |
Inputs the numeric #s | |
DISP./RDS | Selects the display mode in RDS (*) |
|
|
F.DIR/SEAR | Selects the “Frequency direct input” |
|
|
PTY | Displays the programmed information of the current station (*) |
|
|
MEMO | Enters the tuner preset memory numbers |
|
|
CL | Clears the inputting |
|
|
T.MODE | Selects the auto stereo mode or mono mode |
|
|
P.SCAN | Starts preset scan |
|
|
CHANNEL/SKIP | • Selects a preset station |
| • Changes a PTY type |
TUNE/SEARCH | Tunes a station |
|
|
TUNER | Selects a frequency band |
|
|
(*): European model only
9
