USING MACROS | 3. Press CD, 3 , and 3 buttons. |
The following procedure will show how to use the |
|
function buttons for which you have programmed | (2) |
macros. |
|
1. Press the Function button for the desired macro for 3 seconds.
• MACRO is displayed on the LCD for approximately 1 second, after which the number of steps in the macro is displayed on the LCD.
Example 2
Turn the main amplifier ON → Change the amplifier’s input source to DVD → Set the Surround mode to VIRTUAL → Set the DVD player to PLAY.
1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD.
• LEARN and MACRO are displayed blinking. |
2. Press the DVD Function button . |
Now, execute the macro you just programmed.
1.Press the DVD Function button for 3 seconds. The macro commands are transmitted in order, and the steps of the operations are displayed on LCD in order.
ENGLISH
(3)
(1)
• Here the DVD Function button is used as |
the macro button, but any function button |
can in fact be used. |
•The remote control will do nothing if no macros are programmed. The macro steps are executed in order and the names of their buttons are displayed on the LCD. Also, the step numbers displayed on the LCD disappear as each step is executed.
2.After all macro commands have been transmitted, the remote control returns to AMP in use mode.
EXAMPLES OF MACRO PROGRAMS
Example 1
Change the input source for the amplifier to CD and play the 3rd track on a CD in the CD player.
1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD.
•LEARN and MACRO is displayed blinking.
2. Press the CD Function button.
4. When you are finished programming the macro, press the OK button until the display returns to USE mode.
Now, execute the macro you just programmed.
1. Press the CD Function button for 3 seconds.
•The macro commands are transmitted to the components in order, and the steps of the operations are displayed on the LCD in order.
3. To set the various steps of the macro, press the following buttons in order:
(1)AMP*→ (2) POWER ON → (3) DVD → (4) AMP*→ (5) 8 (VIRTUAL) → (6) DVD* → (7)
3.
(2)
(5)
(7)
(3) (6)
(1) (4)
4. When you are finished programming the macro, press the OK button until the display returns to USE mode.
•When executing this macro, function operations AMP* and DVD* only switch the command set of the remote controller and no signal is transmitted to the component.
CLEARING MACRO PROGRAMS
The following procedure is used to erase macros you have programmed into the remote controller’s memory.
1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD.
•LEARN and MACRO are displayed blinking.
2. Press and hold the CL button, then press the button for the Function to be cleared (in this case DVD) for 3 seconds.
DVDCL will appear on the LCD.
31
