Marantz SR6400 manual Front Panel, 7!8 !9, e r t y

ENGLISH

FRONT PANEL						@1
	!5	!6		!7!8 !9
q w	e r t y		u	i o		!0	!1!2
	AV SURROUND RECEIVER SR6400
	SELECTOR						VOLUME
	CLEAR	MEMORY	TUNING	F/P	MODE	DOWN	UP
	SPEAKERS A/B	6.1CH INPUT	A/D	S-DIRECT	DISPLAY
SELECT	ENTER					MUTE	ATT
STANDBY	TVDVD	VCR1	DSS/VCR2 AUX	CD-RTAPE	CD	TUNER
							AUX INPUT
POWER ON/STANDBY	PHONES					S-VIDEO	VIDEOL AUDIO R

!1VOLUME control knob

Adjusts the overall sound level. Turning the control clockwise increases the sound level.

!2ATT (Attenuate) button

If the selected analog audio input signal is greater than the capable level of internal processing, the PEAK indicator will illuminate. If this happens, you should press the ATT button. “ATT” is displayed when this function is activated.

The signal-input level is reduced by about half. Attenuation will not work with the output signal of “REC OUT” (TAPE, CD-R/MD, VCR1 and VCR2 output). This function is memorized for each input function.

!3AUX input jacks

These auxiliary video/audio input jacks accept the connections of a camcorder, portable DVD, game etc.

!8S- (Source) DIRECT button

When this button is pressed, the tone control circuitry is bypassed as well as Bass Management.

Notes:

•The surround mode is automatically switched to AUTO when the source direct function is turned on.

•Additionally, Speaker Configurations are fixed automatically as follows.

Front SPKR = Large, Center SPKR = Large, Surround SPKR = Large, Sub woofer = On

!9DISPLAY button

When this button is pressed, the FL display mode is changed as Surround Mode → Auto-display Off

→Display Off → Input Function and the display off indicator(DISP) lights up in condition of DISPLAY OFF.

!4 !3

@0

!4INPUT FUNCTION SELECTOR buttons (AUDIO/ VIDEO)

These buttons are used to select the input sources. The video function selector, such as TV, DVD, VCR1, DSS and AUX, selects video and audio simultaneously.

@0HEADPHONE jack for stereo headphones

This jack may be used to listen to the SR6400’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4" stereo phono plug. Note that the main room speakers will automatically be turned off when the headphone

qPOWER switch and STANDBY indicator When this switch is pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated.

wSELECT (MULTI FUNCTION MODE

SELECT) button

Press this button to change the mode of the MULTI FUNCTION control dial. l.e. Surround Sound Fields, Tone Control & Set Up Menu.

eSURROUND MODE Selector & MULTI

FUNCTION control dial

This dial changes surround modes & Tone Controls sequentially, and allows you to enter the OSD menu system.

rENTER (MULTI FUNCTION ENTER)

button

Press this button to enter the setup, which you have chosen by the MULTI FUNCTION dial.

tCLEAR button

Press this button to cancel the station-memory setting mode or preset scan tuning. (See page 25)

yMEMORY button

Press this button to enter the tuner preset memory numbers or station names. (See page 25)

u TUNING (Down) / (Up) buttons

Press these buttons to change the frequency or the preset number. (See page 25)

iF/P (Frequency / Preset) button

During reception of AM or FM, you can change the function of the UP/DOWN buttons for scanning frequencies or selecting preset stations by pressing these buttons. (See page 25)

oMODE button

Press this button to select the auto stereo mode or mono mode when the FM band is selected.

The “AUTO” indicator lights in the auto stereo mode. (See page 25)

!0MUTE button

Press this button to mute the output to the speakers. Press it again to return to the previous volume level.

Audio function sources such as CD, TAPE, CDR/ MD, and TUNER may be selected in conjunction with a Video source.

This feature (Sound Injection) combines a sound from one source with a picture from another. Choose the video source first, and then choose a different audio source to activate this function. Press the TUNER button to switch between FM and AM.

!5SPEAKERS A/B button

Press these buttons to select speakers systems A and/or B.

!66.1CH IN button

Press this button to select the output of an external multichannel decoder.

!7A/D (Analog/Digital) SELECTOR button

This is used to select between the analog and digital inputs.

Note:

•This button is not used for an input source, that is not set to a digital input in the system setup menu.

jack is in use.

Notes:

•When using headphones, the surround mode will change to STEREO and TruSurround (TS) headphones by SURROUND MODE selector.

•The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack.

@1INFRARED receiving sensor window

This window receives infrared signals for the remote control.

4