ENGLISH | 3. Press the OK button to clear and return step | 3. Press the Cursor / buttons to change the | |
1. | interval time. | ||
| |||
| • To cancel the memory clearing operation, | • The interval time can be changed from 0.5 | |
| do not press the OK button and simply | to 5 seconds by 0.5 seconds steps. |
| touch any other button. | (0.5 seconds) | |
|
| ||
|
| (1 second) | |
4. To return to the USE mode, press and hold |
| ||
| down the OK button until USE is displayed in | (1.5 seconds) | |
| the display. | ||
|
| ||
ADJUSTING THE INTERVAL TIME OF MACRO |
| ||
OPERATIONS TRANSMITTING | (5 seconds) | ||
1. | Press and hold the T.MODE and SETUP | ||
| |||
button until the SETUP is displayed on the LCD.
• SETUP is displayed for 3 seconds
4. Press and hold down the OK button until USE
is displayed in the display.
2. Confirm the display changes from SETUP to
MCRxx.
(“xx” means the interval time of macro operations transmitting )
TROUBLESHOOTING
In case of trouble, check the following before calling for service:
1.Are the connections made properly ?
2.Are you operating the unit properly following the user’s guide ?
3.Are the power amplifiers and speaker working properly ?
If the unit does not operate properly, check items shown in the following table.
If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz authorized dealer or the Marantz Service Center in your country.
SYMPTOM | CAUSE | REMEDY | |
|
|
| |
SR6400 cannot be turned up. | The power plug is not connected. | Connect the power plug to the outlet. | |
|
|
| |
No sound and picture are | Mute is on. | Cancel mute using the remote control unit. | |
output even when power is on. |
|
| |
The input cable is not connected correctly. | See the connection diagram and connect the | ||
| |||
|
| cables correctly. | |
|
|
| |
| The master volume control is turned all | Adjust the master volume. | |
| the way down. |
| |
|
|
| |
| The function selector position is wrong. | Select correct position. | |
|
|
| |
No speaker output. | The headphones are connected to the | Disconnect the headphones. (Speakers will not | |
| headphone jack. | output sound when headphones are connected.) | |
|
|
| |
Incorrect Audio or Video for | Input cable connected incorrectly. | Connect the cable correctly by referring to the | |
selected source. |
| connection diagram. | |
|
|
| |
Incorrect Audio from a channel. | Speaker cable connected incorrectly. | Connect the cable correctly by referring to the | |
|
| connection diagram. | |
|
|
| |
No Audio output from the | The center speaker cable connection is | Connect the cable correctly. | |
center channel speaker. | incomplete. |
| |
|
|
| |
| STEREO has been selected for Surround | When STEREO is selected for Surround mode, no | |
| mode. | sound will be output from the center speaker. Set | |
|
| another Surround mode. | |
| Center = NONE has been selected in | Make the correct setting. | |
| SETUP mode. |
| |
|
|
| |
No Audio output from the | The surround speaker cable connection | Connect the cable correctly. | |
surround speakers. | is incomplete. |
| |
|
|
| |
| STEREO has been selected for Surround | When STEREO has been selected for Surround | |
| mode. | mode, no sound will be output from the surround | |
|
| speaker. Set another Surround mode. | |
|
|
| |
| Surround = NONE has been selected in | Make the correct setting. | |
| SETUP mode. |
| |
|
|
| |
No Audio output from the | The surround back speaker cable | Connect the cable correctly. | |
surround back speakers. | connection is incomplete. |
| |
| Surround mode is not EX/ES mode. | Set surround mode EX/ES. | |
|
|
| |
| Surround back = NONE has been | Make the correct setting. | |
| selected in SPEAKERS SIZE SETUP |
| |
|
|
|
32
