Marantz SR6400 manual Ht-Eq, Speaker A/B, Ch Input, Recording An Analog Source, the record outputs

ENGLISH	This means that any program you are watching or
	RECORDING AN ANALOG SOURCE
	In normal operation, the audio or video source
	selected for listening through the SR6400 is sent to
	the record outputs.
	listening to may be recorded simply by placing
	machines connected to the outputs for TAPE OUT,
	CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT
	in the record mode.
	To record the input source signal you are
	currently watching or listening to
	1.
	OUND RECEIVER SR6400
	CLEAR	MEMORY	TUNING	F/P	MODE
	NTER				1.
	TVDVD	VCR1	DSS/VCR2 AUXCD-R	TAPE	CDTUNER
	HONES

1. Select the input source to record by pressing the corresponding input selector button. The input source is now selected and you may watch or listen to it as desired.

2. The currently selected input source signal is

output to the TAPE OUT , CD-R/MD OUT, VCR1

OUT, and DSS/VCR2 OUT outputs for recording.

3. Start recording to the recording component as desired.

Recording the video from one source and the audio from another

You can add the sound from one source to the video of another source to make your own video recordings.

Below is an example of recording the sound from a compact disc player connected to CD IN and the video from a video camera connected to AUX IN to video cassette recorder connected to the VCR1 OUT jack.

1.2.

400

1. Press the AUX input source button to set video output.

2. Press the CD input source button to set audio output.

3. Now “CD” has been selected as the audio input source and “AUX” as the video input source.

Notes:

•If you change the input source during recording, you will record the signals from the newly selected input source.

•You cannot record the surround effects.

•Digital input signals are only output to the digital outputs. There is no conversion from digital to analog .

When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well.

HT-EQ

6400

CLEAR MEMORY TUNING F/P MODE

TV DVD VCR1 DSS/VCR2 AUX CD-R TAPE CD TUNER

Press the EQ button on the remote to turn on the HT-EQ mode.

The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments.

Activating the HT-EQ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance.

SPEAKER A/B

AV SURROUND RECEIVER SR6400

SELECTOR

		CLEAR	MEMORY		TUNING
SELECT	ENTER
	TV	DVD	VCR1	DSS/VCR2	AUX
POWER ON/STANDBY	PHONES

SR6400 has speaker system - A and speaker system- B for front L/R channels.

You can select these systems by pressing SPEAKERS A/B button on the front panel or SPKR A/B on the remote

6.1 CH INPUT.

The SR6400 is equipped for future expansion through the use of Multi channel SACD multichannel player or DVD-Audio player.

When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right) and SB (surround back) channels of the 6.1 CH. In jacks are output directly to the front (left and right), center, surround (left and right) and surround back speaker systems as well as the pre-out jacks without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SW (subwoofer) jack.

When 6.1 CH. INPUT is selected, the last video input used remains routed to the Monitor Outputs. This permits simultaneous viewing with video sources.

2.

V SURROUND RECEIVER SR6400

	CLEAR	MEMORY		TUNING		F/P	2.
ENTER
TV	DVD	VCR1	DSS/VCR2	AUX	CD-R	TAPE

PHONES

3. If it is necessary to adjust the output level of each channel, use “6.1 Ch. INPUT LEVEL” in the OSD menu system as desired.

Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front left, front right, center, surround left, surround right and surround back speakers, the output levels can be adjusted between –10 to +10 dB.

The subwoofer can be adjusted between –15

and +10 dB.

These adjustments will be stored to 6.1 Ch.

INPUT memory. (see to page 18)

4. Adjust the main volume with the MAIN VOLUME knob or the VOL buttons on the remote.

To cancel the 6.1 Ch. INPUT setting, press the 6.1 CH INPUT button on the front panel or press 7.1/6.1 IN on the remote.

Notes:

•When the 6.1 Ch. Input is in use, you may not select a surround mode, as the external decoder determines processing.

•In addition, there is no signal at the record outputs when the 6.1 Ch. Input is in use.

CLEAR		MEMORY		TUNING		F/P	MODE	2.
TV	DVD	VCR1	DSS/VCR2	AUX	CD-R	TAPE	CD	TUNER

1.

1. Select a desired Video source to decide the routed video signal to the Monitor Outputs .

2. Press the 6.1 CH INPUT button on the front panel or press 7.1/6.1 IN on the remote to switch the 6.1 channel input.

24