Alpine VPA-B211A Installation, Velcro fastener Mounting, Specifications, Screw-down Mounting

Indication for iPod Mode

NO iPod

•The iPod is not connected.

-Make sure the iPod is correctly connected. Make sure the cable is not bent excessively.

•The iPod’s battery remains low.

-Refer to the iPod’s documentation and charge the battery.

NO SONG

•There are no songs in the iPod.

-Download songs to the iPod and connect to the KCA- 420i.

ERROR

•Communication error

-Turn the ignition key off, and then set to ACC or ON again.

-Check the display by reconnecting between the iPod and the adapter, using the iPod cable.

•Caused by the iPod Software Version not being compatible with the optional adapter KCA-420i.

-Refer to the Owner's Manual of the optional adapter KCA-420i, and update the iPod Software Version to be compatible with the optional adapter KCA-420i.

Installation

Velcro fastener Mounting

When mounting the unit with the Velcro fasteners, be sure to choose a flat location.

Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners.

1 Remove the protective paper and attach two pieces of velcro fastener to the bottom of the VPA-B211A.

	Protective paper
	Velcro Fasteners
Protective paper	(Included)

Indication for AUX Mode

I/F BOX ERROR (AUX3 mode only)

•The optional expansion box (VPE-S431) is not correctly connected.

-Make sure the VPE-S431 is correctly connected, and the cable is not bent excessively.

Specifications

External dimensions
Wide	180 mm (7-1/8")
Height	35 mm (1-3/8")
Depth	160 mm (6-1/4")
Weight	0.75 kg (1lb 10 oz)

2 Check the position, and then fix the VPA- B211A to the floor carpet.

Screw-down Mounting

1 Using the adapter as a template, hold it in the mounting location and mark the holes to be drilled. Before drilling, make sure that there are no objects that could be damaged behind the mounting surface.

2 Drill holes and secure the adapter with the self-tapping screws (M4 ⋅ 14) supplied.

21-EN