Altec Lansing IMT800 manual Listening to Your iPhone or iPod, 1Dock your iPhone or iPod in the

1Dock your iPhone or iPod in the

Altec Lansing Mix speaker system.

Make sure the correct adapter for iPhone or iPod is inserted in the speaker system’s dock. Slide the guard down to protect the iPhone or iPod.

2Select “iPod” mode.

Press the “SOURCE” button on your

speaker system or clip-on remote until the iPod icon appears on the LCD.

3Press the button on your iPhone, iPod, or clip-on remote.

Music from your iPhone or iPod will start playing. The speaker system and the clip-on remote are capable of controlling basic functions of 3rd-generation iPod models, the iPod touch, the iPod nano and the iPhone.

4Adjust the volume.

Rotate the knob on the Altec Lansing speaker system to adjust the system volume. Or, use the “+”and “–” buttons on the clip-on remote.

5Find your desired song.

Press the or button on your speaker system or clip-on remote to go to the next or previous track. Press and hold the or button on your speaker system or clip-on remote while the track is playing for high-speed forward or reverse music search of the current track.

Listening to Your iPhone or iPod

NOTE To conserve battery power, reduce the speaker system volume level.

NOTE During battery-only operation, the speaker system automatically shuts down if no audio is detected for a few minutes. This is to conserve battery power. Press the button on the speaker system or the button on the clip-on remote to turn the speaker system back on.

NOTE The speaker system is compatible with the alarm clock and sleep timer features built into select iPhone and iPod models. For these features to work properly, the speaker system must be connected to a wall outlet. When an iPhone or iPod is docked, the speaker system will not shut down automatically, enabling the alarm or sleep timer to play through the speaker system. See the user guide for iPhone or iPod for details on how to access these features.

NOTE During AC operation, if there is no iPhone or iPod docked and no audio input signal is detected for a few minutes, the speaker system automatically shuts down to conserve energy. Press the button on the speaker system or the button on the clip-on remote to turn the speaker system back on.

en

11