Personalizing the Power-On Message
Whenever you turn on your Altec Lansing Mix speaker system, the Altec Lansing logo will appear for approximately 3 seconds followed by a personalized message, if you’ve set one. The Mix comes with no preset
1Enter the Message Screen Edit Mode.
Press and hold the “SOURCE,” “EQ,” and buttons. All four buttons must be pressed at approximately the same time while the Altec Lansing logo is displayed. The following message will appear on the LCD: “Add a personal message by selecting letters with the track buttons and rotary control.”
2Add your personal message.
Rotate the knob until the desired letter, number or symbol is displayed. Press the button to make your selection and move to the next space. Continue this process until your entire message is displayed.
3Exit the Message Screen Edit Mode.
Press the knob to save the message and exit the Message Screen Edit Mode.
How to Delete a Personalized Message
1Enter the Message Screen Edit Mode.
Press and hold the “SOURCE,” “EQ,” and buttons. All four buttons must be pressed at approximately the same time while the Altec Lansing logo is displayed. The following message will appear on the LCD: “Add a personal message by selecting letters with the track buttons and rotary control.”
2Clear the message.
Press the “SOURCE” button to clear the message.
3Exit the Message Screen Edit Mode.
Press the knob to exit the Message Screen Edit Mode.
Maintaining Your Speaker System
Place your speaker system on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture with a cloth or other protective material when placing your speaker system on a natural wood or lacquered finish.
Clean your speaker system with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials, can damage the surface of the unit.
en
17