Example:
Send the text string "HELLO" to the RS-232 bus. The string will be ignored by the MultiTasker, but not the unit receiving the command. Additionallly, it will add opening and closing brackets. To do this, send the command [TXMHELLO] and the following will be sent to the RS-232 bus:
[HELLO]
26.<x[y]z>
This command is used to send ISM5000 command strings to the RS-232 bus through the MultiTasker. It transmits the “< >” symbols with the command string and allows bracket commands within the command string.
Command Format: <x[y]z>
x[y]z = text string ("a[b]c" or "1[2]3" or…)
Example:
Send the command string "<abc[123]xyz>" to the RS-232 bus. The string will be ignored by the MultiTasker, but not the unit receiving the command. Additionallly, it will add opening and closing brackets. To do this, send the command <abc[123]xyz> and the following will be sent to the RS-232 bus:
<abc[123]xyz>
27.<@x[y]z>
This command is used to send ISM5000 command strings to the RS-232 bus, through the MultiTasker. It removes the “< >” symbols in the command string and allows bracket commands within the command string.
Command Format: <x[y]z>
x[y]z = text string ("a[b]c" or "1[2]3" or…)
Example:
Send the command string "abc[123]xyz" to the RS-232 bus. The string will be ignored by the MultiTasker, but not the unit receiving the command. Additionallly, it will remove the opening and closing brackets. To do this, send the command <@abc[123]xyz> and the following will be sent to the RS-232 bus:
abc[123]xyz
28.[TEST]
This command performs a non-destructive test of the internal memory.
Command Format: [TEST]
Example:
In order to test the MultiTasker internal memory, send the command [TEST]. The system will respond as follows if the test passes:
[ ] [ ]
Otherwise, failures will be indicated.
29.[HELP]
This command displays information available for the MultiTasker interface commands or card commands. Sending the command without a card reference returns help for the interface.
Command Format: [HELPCn], [HELPUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 20)
Example 1:
In order to view the RS-232 commands available for the MultiTasker, send the command [HELP]. The commands along with a brief description will be displayed in the Terminal Window.
Example 2:
In order to view the RS-232 commands available for C2, send the command [HELPC2]. The commands along with a brief description will be displayed in the Terminal Window.
