MULTITASKER™
Command Format: [RMCn1Cn2…GkUi] Cn = Card ID (n= # from 1 to max slots)
Gk = Group ID (k = # from
Ui = Unit ID (i = # from
Example:
Group 5 consists of the cards located in slots numbered 2, 4, and 6. Remove just cards 4 and 6 from the group by sending the command [RMC4C6G1]. The system will return the following feedback:
[G5=C2]
27.[RMG]
This command may be used to delete an entire group, or all groups.
REMOVE A GROUP
Remove all the members from the group, effectively deleting the group.
Command Format: [RMGkUi]
Gk = Group ID (k = # from
Ui = Unit ID (i = # from
Example:
Group 5 consists of the cards located in slots number 2, 4 and 6. Remove all cards from the group by sending the command [RMG5]. The system will return the following feedback:
[G5=0]
REMOVE ALL GROUPS
Remove all the members from every group, effectively deleting all groups.
Command Format: [RMG*Ui]
Ui = Unit ID (i = # from
Example:
Group 5 consists of cards 2, 4 and 6. Group 2 consists of cards 1, 2, 3, 4 and 5. Delete all the groups by sending the command [RMG*].
The system will return the following feedback:
28.[RD]
This command reads and then displays the members in each group.
Command Format: [RDGkUi]
Gk = Group ID (k = # from
Ui = Unit ID (i = # from
Example:
The cards in slots 2, 4 and 6 are part of group 5. Read the member data for group 5, by sending the command [RDG5]. The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 (group 5) and then the cards that make up group 5. In this case, group 5 includes C2, C4 and C6.
29.[TEST]
This command performs a series of tests on the internal memory of the card.
Upon completion, the system will display following:
Command Format: [TESTCn]
Cn = Card ID (n = # from 1 to 99)
Example:
Test the internal memory of the
MEMORY IS GOOD
Otherwise, failures would be indicated in the feedback from the card.
30.[VLO]
This command sets the absolute volume level for a given output.
17 |
