MULTITASKER™
PRECAUTIONS / SAFETY WARNINGS | 1 |
Please read this manual carefully before using your
1.1 GENERAL
∙Qualified ALTINEX service personnel, or their authorized representatives must perform all service.
∙To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the
∙Handle the
∙Do not pull the cables that are attached to the
∙Insert the card carefully into the slots of the MultiTasker without bending any edges.
∙When removing a card, pull it halfway through to avoid damage to internal cables. If an expansion card is being removed, please make sure that the Main card to which it is attached is also pulled out simultaneously.
1.3 CLEANING
∙Clean only the connector area with a dry cloth. Never use strong detergents or solvents, such as alcohol or thinner. Do not use a wet cloth or water to clean the card. Do not clean or touch any component or PCB.
1.4 FCC / CE NOTICE
∙This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
∙This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his expense.
∙Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.
2 |
