MULTITASKER™
2.Set Input 3 Volume
Starting from the Main Menu, set Input 3 volume level to 16. Follow the keystrokes below.
2 Select SETUP Menu
2Select Set Input Volume
3Select Input 3 Volume
16Enter 16
NOTE The system may echo the 1 and the 6 entries, depending on the settings.
ESC | Return to SETUP |
ESC | Return to the MAIN Menu |
3.Set Output Volume
Starting from the Main Menu, set the output volume level to 16. Follow the keystrokes below.
1 Select CONTROL Menu
4 Select VOLUME
1 Select OUTPUT volume
111… | Press ‘1’ to increase volume level until |
| 16 is reached. |
ESC | Return to VOLUME Menu |
ESC | Return to CONTROL menu |
ESC | Return to the MAIN Menu |
4.Set Ramp Time
Starting from the main menu, set the ramp time to 10 seconds. Follow the keystrokes below.
2 Select SETUP Menu
3Select Set Ramp Time
4Select Ramp Time = 10 seconds
ESC | Return to SETUP menu |
ESC | Return to the MAIN Menu |
5. Display Card Status
Starting from the Main Menu:
3 | Displays card status |
NOTE: The status will be displayed, followed by the Main Menu being redisplayed.
TROUBLESHOOTING GUIDE | 8 |
We have carefully tested and have found no problems in the supplied
8.1 FAN DOES NOT SPIN
Cause 1: Card cage is not plugged into power outlet.
Solution: Plug card cage in. If the fan turns on, the problem is solved. If the fan is still not on, see Cause 2.
Cause 2: Card is not plugged in all the way.
Solution: Push the card in all the way. If the fan still does not spin, see Cause 3.
Cause 3: Card cage slot has a problem.
Solution 1: Test the card in other slots. If the slot was damaged, the card may work in other slots. If other slots work, and the fan is on, the problem is the card cage slot. The card cage may require service. Call ALTINEX at (714)
Solution 2: Take any other known good card with an LED or fan and verify that the slot used is good by seeing if the other card’s LED (or fan) turns on. If so, then the original card may be the source of the problem. Call ALTINEX at (714)
8.2 NO SOUND
Cause 1: The source has a problem.
Solution Check the | source and | make | sure | ||
that it is working at an appropriate | |||||
volume level | and | all | source | ||
connections | are | correct. | If | the |
source is working and there is still no sound, see Cause 2.
22 |