MULTITASKER™
REMOVE ALL GROUPS
Remove all the members from every group, effectively deleting all groups.
Command Format: [RMG*Ui]
Ui = Unit ID (i = # from
Example:
Group 1 consists of cards 1 and 2. Group 2 consists of cards 1, 2, 3, 4 and 5. Delete all the groups by sending the command [RMG*]. The system will return the following feedback:
41.[RD]
This command reads and then displays the members in each group.
Command Format: [RDGkUi]
Gk = Group number (k = # from
Ui = Unit ID (i = # from
Example:
The cards in slots 1, 2 and 19 are part of group 5. Read the member data for group 5, by sending the command [RDG5]. The system will return feedback as follows:
G1=C1C2C19
The feedback shows G1 (Group 1) and then the cards that make up Group 1. In this case, Group 1 includes C1, C2 and C19.
42.[CLM]
This command removes the members in a group and leaves the group empty. It is equivalent to sending the [RMGkUi] command without card references.
Command Format: [CLMGkUi]
Gk = Group number (k = # from
Ui = Unit ID (i = # from
Example:
Group 5 of Unit ID 1 contains the cards in slots 1, 2 and 19. Read the member data for group 5 of Unit ID 1. Send the command [RDG5U1] and receive the following feedback:
G1=C1C2C19
Now, clear group 5 by sending the command [CLMG5U1]. Reread the member data as above and note the following feedback:
G1=EMPTY
7.3SUMMARY OF COMMANDS Card Commands
1) [VER] | Receives software version |
2)[C] Receives status of the card
3) [CnS] | Save card settings |
4)[?] Show system cards
5) | [?C] | Show card information |
6) | [STA] | Enable/disable auto feedback |
7) | […S] | Save the command being sent |
8) | […F] | Show command feedback |
9) | [ + ] [ - ] | Increments and Decrements |
10) | [SELI] | Select input volume to adjust |
11) | [SELO] | Select output volume to adjust |
12) | [SELB] | Select to adjust bass level |
13) | [SELT] | Select to adjust treble level |
14) | [VLOA] | Set absolute output volume |
15) | [VLI] | Set absolute input volume |
16) | [VLBA] | Set absolute bass level |
17) | [VLTA] | Set absolute treble level |
18) | [LOD0] | Turn ON loudness feature |
19) | [LOD1] | Turn OFF loudness feature |
20) | [MUT0] | Turn ON speaker output |
21) | [MUT1] | Turn OFF speaker output |
19 |