Alto-Shaam 300-HW/D443 manual I N S T A L L A T I O N, D A N G E R, C A U T I O N, Leveling, 16019

Models: 100-HW/D643 100-HW/D443 100-HW/D4 200-HW/D4 300-HW/D443 300-HW/D4 500-HW/D4 300-HW/D643 400-HW/D6 400-HW/D4

1 23
Download 23 pages 34.87 Kb
Page 5
Image 5
I N S T A L L A T I O N

I N S T A L L A T I O N

D A N G E R

IMPROPER INSTALLATION,

ALTERATION, ADJUSTMENT,

SERVICE, OR MAINTENANCE COULD

RESULT IN SEVERE INJURY, DEATH,

OR CAUSE PROPERTY DAMAGE.

READ THE INSTALLATION,

OPERATING AND MAINTENANCE

INSTRUCTIONS THOROUGHLY

BEFORE INSTALLING OR SERVICING

THIS EQUIPMENT.

The Alto-Shaam appliance must be installed in a location that will permit the unit to function for its intended purpose and

to allow for proper cleaning, and maintenance.

1.The appliance must be installed on a stable and level surface. A non-combustible, heat resistant surface is highly recommended.

2.DO NOT install this appliance in any area where it may be affected by any adverse conditions such as steam, grease, dripping water, high temperatures, etc.

3.The outer walls of the hot well can reach 200°F

(93°C) to 260°F (127°C). Verify countertop material temperature rating with manufacturer before installing to ensure counter can withstand heat.

C A U T I O N

TO PREVENT PERSONAL INJURY,

USE CAUTION WHEN MOVING OR

LEVELING THIS APPLIANCE.
LEVELING

The heated well should be leveled before the

electrical supply is connected. Level the appliance from side-to-side and front-to-back with the use of a spirit level. For appliances installed on a mobile stand, it is important that the floor surface be level due to the probability of frequent repositioning.

NOTE

It is important to apply a food grade silicone underneath the decor flange to seal flange to the countertop.

OPTIONS AND ACCESSORIES

pan divider bars

 

HW Series full-size

16019
300-HW/D443 & D643 full-size
1011928

HW Series half-size /third-size

11318
ROUGH CUT COUNTER TOP OPENING

model 100-HW/D4 or D6 one pan:

14-1/4" x 22-3/4" (362mm x 578mm)

model 100-HW/D443 or D643 one & one-thrid pan:

14-1/4" x 29-3/4" (362mm x 756mm)

model 200-HW/D4 or D6 two pan:

22-3/4" x 27" (686mm x 563mm)

model 300-HW/D4 or D6 three pan:

40" x 22-3/4" (1016mm x 578mm)

model 300-HW/D443 or D643 three & one-third pan:

40" x 29-3/4" (1016mm x 756mm)

model 400-HW/D4 or D6 four pan:

53-1/8" x 22-3/4" (1350mm x 578mm)

model 500-HW/D4 or D6 five pan:

66-1/4" x 22-3/4" (1683mm x 578mm)

Hot Food Drop-In Well Operation & Care Manual • 3

Page 5
Image 5
Alto-Shaam 300-HW/D443 manual I N S T A L L A T I O N, D A N G E R, C A U T I O N, Leveling, Options And Accessories, 16019