Chapter 3 - Getting Started

3.4 Before Using the Device

You should charge your Libre Air before using it. Please make sure the Libre Air is powered off, connect the power adapter and charge its inter- nal batteries for 4-5 hours continuously. The red LED will be on during charging, The Red LED will turn off when charging is complete.

3.5 Basic Operation

A. Power On

When the Libre Air is off, press power button for 3 seconds to power on.

B. Power Off

When the Libre Air is on, press power button for 3 seconds to power off.

C. Standby

When the Libre Air is on, press power button shortly to enter Standby mode. At this time, the LCD screen will be switched off. While in Standby mode, press power button shortly to resume to reading mode.

Note: The whole “Power On” process takes about 40 seconds. To resume from Standby mode to Reading mode, it takes only about 3 seconds. If you plan to take a break from reading, it is suggested that you enter Standby mode instead of pow- ering off the Libre Air to minimize the time it takes to get back to Reading mode.

D. Reset

While using your Libre Air, if any abnormal situation happens, such as a system freeze, please use a paper clip to press the Reset key at the back of the Libre Air. Then, the Libre Air will restart.

E. Icons

file is stored in SD card

search mode

picture file text file EPUB file HTML file RTF file

page is bookmarked folder icon

MP3 file PDF file FB2 file PRC file MOBI file

9

Page 9
Image 9
Aluratek AEBK02FB manual Before Using the Device, Basic Operation