39
K. OPERATING INSTRUCTIONS
NOTE: Before attempting to start the dryer make sure that the main door is closed and the
lint drawer is securely in place.
1. To start the dryer.
a. Microprocessor (Computer) Dryers
1) Display will read "FILL" (meaning no cycle in progress).
2) Press the letter on the keyboard (touchpad) corresponding to the cycle desired (i.e., Ke "E")...
a) The dryer will then start (rotate).
3) L.E.D. display will now show the Cycle In progress and Cycle status (i.e., "dr30") meaning that the
dryer is in the drying cycle (dry mode for 30 minutes) and count down in minutes.
NOTE: Pressing touch pad key "A," "B," "C," "D," and "F" will also start the dryer. The six (6)
preprogrammed drying cycles ("A" through "F") have been stored in the microprocessor
(computer's) memory. Refer to the Computer Programming Manual supplied with dryer
for more specific operating information.
NOTE: The dryer can be stopped at any time by opening main door or by pressing the "CLEAR/
STOP" key. To restart the dryer, press the "ENTER/START" key or preprogrammed
cyclekey (i.e., "E").
NOTE: Selection (setting) changes can be made at any time during the drying cycle by pressing
the "CLEAR/STOP" key twice. The L.E.D. display will return to "FILL" at which time
a new cycle selection can be made.
b. Dual Timer Dryers
1) Select Drying Time and Cool Down Time desired...
a) Turn Heat Timer clockwise (CW) to desired time (i.e., 1 minute to 60 minutes).
b) Turn Cool Down Timer clockwise (CW) to desired time (i.e., 0 minutes to 30 minutes).
2) Select Drying Temperature ("HI TEMP," "LO TEMP," or "PERM PRESS").
3) Push "Push to Start" switch...
a) Dryer will now start.
4) To stop dryer, open the main door.