INPUTS: (RED)

OUTPUTS: (GREEN)

1.

FDRC - Front Door Closed

1.

R_HEAT - Rear Heat

2.

FDRO - Front Door Open

2.

AUDIO ALERT - Horn On

3.

TBOL - Basket (Tumbler) Overload

3.

FWD - Basket (Tumbler) Forward

4.

FNOL - Fan Overload

4.

REV - Basket (Tumbler) Reverse

5.

RDWN - Rear Down

5.

AIR JET - Air Jet On

6.

FDWN - Front Down

6.

FAN - Blower Fan On

7.

RDRC - Rear Door Closed

7.

F_HEAT - Front Heat

8.

RDRO - Rear Door Open

8.

PRG1 - Programmable Output #1

9.

FAN - Blower Fan On

9.

PRG2 - Programmable Output #2

10.

RBHL - Rear Burner High Limit

10.

PRG3 - Programmable Output #3

11

R_SS - Rear Sail Switch

11.

PRG4 - Programmable Output #4

12.

FBHL - Front Burner High Limit

12.

OCL1 - Open Collector Output #1

13.

F_SS - Front Sail Switch

13.

OCL2 - Open Collector Output #2

14.

EXHL - Exhaust High Limit

14.

OCL3 - Open Collector Output #3

15.

DRY - Dry Enable Bit

15.

OCL4 - Open Collector Output #4

16.

LINT - Lint Drawer

16.

OCL5 - Open Collector Output #5

17.

R_HE - Rear Heat Enable

17.

OCL6 - Open Collector Output #6

18.

F_HE - Front Heat Enable

18.

OCL7 - Open Collector Output #7

19.

24VIN - Control Voltage 24 Volts AC

19.

OCL8 - Open Collector Output #8

20.

SPR5 - Spare Input #5

20.

EOC - End Of Cycle Light

21.SPR4 - Spare Input #4

22.SPR3 - Spare Input #3

23.SPR2 - Spare Input #2

24.SPR1 - Spare Input #1

25.RVLV - Rear Gas Valve

26.FVLV - Front Gas Valve

27.24IN - Board 24 Volt AC

28.+5V - Regulated Voltage

29.Model - Communication

Input/Output (I/O) Board Input Description (“Red” light emitting diode [L.E.D.])

1.

FDRC – (RED L.E.D.)

This L.E.D. will indicate the status of the Front Doors. If the doors are closed,

 

 

then the L.E.D. is ON.

2.

FDRO – (RED L.E.D.)

This L.E.D. will indicate the status of the Front Doors. If the doors are open,

 

 

then the L.E.D. is ON.

3.

TBOL – (RED L.E.D.)

This L.E.D. will indicate the status of the Basket (tumbler) Overload Contact.

 

 

If the contact is closed, then the L.E.D. is ON. If it faults open, then the L.E.D.

 

 

is OFF.

4.

FNOL – (RED L.E.D.)

This L.E.D. will indicate the status of the Fan Overload Contact. If the contact

 

 

is closed, then the L.E.D. is ON. If it faults open, then the L.E.D. is OFF.

5.

RDWN – (RED L.E.D.)

This L.E.D. will indicate the status of the Rear Tilt. If the rear of the dryer is

 

 

down, then the L.E.D. is ON (optional).

6.

FDWN – (RED L.E.D.)

This L.E.D. will indicate the status of the Front Tilt. If the front of the dryer is

 

 

down, then the L.E.D. is ON (optional).

7.

RDRC – (RED L.E.D.)

This L.E.D. will indicate the status of the Rear Doors. If the doors are closed,

 

 

then the L.E.D. is ON.

61

Page 65
Image 65
American Dryer Corp AD-310 Phase 7 installation manual Inputs RED Outputs Green