b.Select Temperature...
The dryer will start, the L.E.D. (light emitting diode) display will read the temperature cycle selected, and the drying time portion of the L.E.D. (light emitting diode) display will read "00" and count upward as time elapses, or the vended time will count downward, depending on the program parameter setting.
IMPORTANT: If the door is opened during a cycle, both the heat and motor will stop. However, the microprocessor controller (computer) will continue to count the time, either upward or downward, depending on which parameter is programmed. Continuation of the cycle will resume only after the door has been closed and any other of the three (3) temperature selection buttons is again depressed.
c. Once the preprogrammed dryness level and cool down period has been reached or the maximum automatic time has expired, whichever comes first, the tone (buzzer) will sound for five (5) seconds, and the L.E.D. (light emitting diode) display will read "donE", at which time the dryer will shut off.
NOTES: 1. If the
2.If the
4.
a.Turn power on to the dryer.
b.Insert coin(s) - rotary meter type ONLY.
c.Select temperature by using rocker switch and selecting "HI TEMP," "LO TEMP," or "PERM PRESS."
d.Press "Push to Start" button to start the cycle.
e.Upon completion of the drying and cooling cycles the dryer will shut off.
NOTE: If the door is opened during a cycle, both the heat and motor will stop. Continuation of the cycle will only resume after the door has been closed, and the "Push to Start" button is pressed.
OPL MODELS
NOTE: Before attempting to start the dryer make sure the main door is closed and the lint drawer is securly in place.
1.To start the dryer:
a. Microprocessor (computer) dryers ...
37
