16. | LINT – (RED L.E.D.) | This L.E.D. will indicate the status of the Lint Drawer. If the drawer is closed, |
|
| then the L.E.D. is ON. |
17. | 24VM – (RED L.E.D.) | Control voltage at the spare inputs. |
18. | FVLV – (RED L.E.D.) | This L.E.D. will indicate the status of the Front Gas Valve. If the Front Gas |
|
| Valve is open (ON), then the L.E.D. is ON. |
19. | RVLV – (RED L.E.D.) | This L.E.D. will indicate the status of the Rear Gas Valve. If the Rear Gas |
|
| Valve is open (ON), then the L.E.D. is ON. |
20. | SPR1 – (RED L.E.D.) | This is for a spare input to be used with programmable outputs. |
21. | SPR2 – (RED L.E.D.) | This is for a spare input to be used with programmable outputs. |
22. | SPR3 – (RED L.E.D.) | This is for a spare input to be used with programmable outputs. |
23. | SPR4 – (RED L.E.D.) | This is for a spare input to be used with programmable outputs. |
24. | SPR5 – (RED L.E.D.) | This is for a spare input to be used with programmable outputs. |
25. | +24 – (RED L.E.D.) | This L.E.D. will indicate the board voltage that is protected by Fuse #2. |
26. | 24IN – (RED L.E.D.) | This L.E.D. will indicate 24 VAC to the board. |
27. | MCR+ - (RED L.E.D.) | This L.E.D. will indicate the status of the Control Voltage. If the Power On |
|
| button is pressed (Green Button Light is On), then the L.E.D. is ON. |
9 9
